Bartman

Download the Premium Model Here!

Bartman Swings into Action!

Springfield’s favorite troublemaker takes on his superhero alter ego in this Bartman 3D print model! With his iconic purple mask, flowing cape, and rebellious attitude, this model captures Bart Simpson in full vigilante mode. Whether you're a longtime Simpsons fan or just love collecting unique characters, this print is a must-have for any collection. Time to bring some mischief and justice to your display—Bartman-style!

Dimensions:

• Bartman stands approximately 5.80 inches (148mm) tall at 100% scale. You can scale the model up or down, but keep in mind that tolerances may become tight when scaling down.

Colors Used:

• Elegoo: Matte Yellow, Matte White, Purple, Sky Blue (Shirt)

• Bambu Basic: Black

• Bambu Matte: Marine Blue

• Sunlu High Speed: Grey

Printing Tips:

• Supports: Please refer to the print settings picture.

Assembly Tips:

• When removing supports from the cape, be careful not to break the front tie, as it is delicate and can bend easily.

• The legs have arrows at the top indicating the forward direction.

• Both the shoes and soles are marked with L/R to indicate Bart’s left and right foot.

Assembly Steps:

• Attach the soles to the shoes, aligning L/R.

• Attach the socks, then secure the shoes to the legs.

• Insert the legs into the shorts, ensuring the arrows on the legs point forward.

• Connect the shorts to the belt and shirt using the body pin.

• Glue the arms to the body.

• Attach the belt packs—add as many as you like around the belt!

• Glue the purple mask onto the face.

• Insert the black eye pieces, then attach the eyes to face.

• Place the cape over the body, then attach the head to the body.

Congratulations! Your Bartman 3D print is now fully assembled and ready to bring some mischief and justice to your collection. Whether he’s perched on display or taking on imaginary villains, this model captures the rebellious spirit of Springfield’s favorite troublemaker. Enjoy your print, and remember—Bartman never backs down from an adventure!

Classic Bart Update (Version 1.1) – Available Now On Makerworld Click Here!

I've made some minor adjustments to the Classic Bart figure to improve accuracy and consistency with future models. The original design had a slightly longer neck, which affected his overall height. This update ensures Bart is now properly scaled.

Changes in Version 1.1:

✔ Shortened the neck for accurate height.
✔ Revised the shirt to fit the new neck and updated the pin to a solid design.
✔ Slight modifications to the left hand fingers.

Enjoy the improved Classic Bart!

Thank you all for your amazing support! The Simpsons models have been a huge hit, and I’m excited to keep releasing more! Your suggestions are always welcome—let me know which characters you’d love to see next!