November Patches

Prusaslicer said Empty layers detected. Print z 0.35. Hope that's helpful.

Prusaslicer gave me an error when I tried to slice it and Cura let me slice it but it was printing into the air so I stopped the print.

Alright the patch is added to the post above:)

HI, Heath, I'll have a look, sounds like I might have put the wrong version in or maybe it was a work file that I didn't toss. I wouldn't intentionally release a rubble pile that size so it is something.

Anyone else having issues with rubble pile 6? The file size is also 97KB compared to 22ishKB on the others.

Just making sure I didn't miss the update for the entrance. Thanks for the amazing work and communication. It's much appreciated!

Yeah was trying to save on filament, I'll punch it up for you and send a link. The shack versions for december should be fine:)

Thank you so much! I've been wanting small houses to sell at our store. One small thing I noticed was the entrance on the thatch houses under RC is extremely thin and brittle.

Thanks for the comment Shane, Let me know if any issues or ideas pop up. I'll get out at least one larger shack next month and add on to those thatch roof options:)

loving the buildings, great for dnd. love the aesthetic, i will be using these a lot

Hi Eric, awesome! I'll look into adding some more of the city block stuff. You haven't heard of 1mm scale table top wargaming? Looks like I somehow converted to inches when I was cutting. I'll get the right size up in the morning, thanks for the heads up:)

Got it, I'll add it. was looking for some odds and ends stuff, thanks

Hi, Great release ! I like the shacks, and even better the ones in the city blocks. But the cut fences scale is way off.

Eric Matecki

Great release! Maybe not the most exciting but I would love to get transition pieces that could connect your trails with their respective roads. Also stairs and/or ramps for the wooden palisades and their tower pieces.

Thanks Jake looking forward to seeing it. Also a good idea to use up those end rolls:)

All of these look great -- Currently printing some rubble to use up the last of a filament spool before trying the goblin watchtower

oldschoolfrp

Antonio the T is all fixed up, there were a number of issues, it looks like I packed the wrong version of that part. It is all set now, thanks for the heads up. The patch is on the November release post. Yeah some of those stone fences are large. I threw that together at the last second and didn't take a hard look at it. It is a simple deform so any non-uniform scale change to x/y of up to 15% will be fine. That said, the straight sections were VERY long so I went ahead and added some "cut versions" that can be glued. I found decent spaces for the cuts so it should be a easy to hide them. I'll do some more next month that are more 8inch plate friendly.

I've seen also that some of the larger and "straight" Stone fences also doesn't fit...and with that I didnt had any luck rotating… I was for the road but this month scatter also are quite Good... Good job

Antonio Miguel Martorell Ferriol

I'll take a look at it, I should be able to work this out.

Well at the end rotating a bit to one side going in 1% made it fit...so "I got it"

Antonio Miguel Martorell Ferriol

I jumped these last months for the ruins... I'm into frostgrave and I think they would fit perfect there... and the road with ruins of that month was perfect... but: It take forever to print... I would not say that one piece would be 24h :( - no problem here...only was unexpected- and the T one doesnt fit in Ender3 plate... by nothing... i try to move it a bit but it seems that both ends are not "square" ... they have like an angle so if you put it parallel on one side in the other less than an inch it's out... I could reduct to 99% (yes that little it's enought) but there's something you can do so it fits ¿?

Antonio Miguel Martorell Ferriol

Yes, it is intentional, sort of an experiment. you can see in the included image, both houses are off square. Thanks:)

Great work as always, thanks!! One minor warning, I believe there is a problem with the model at CityBlock_Shack folders 1.stl file. It seems like the house is duplicated in an angle

Hey Ken, I think I'm starting to see what the issue is, I started distributing through the website after that point so that stuff is missing. Got it. Let me have a look at what is in those months and see what I can figure out.

Ditto on being a Patreon since July. I have links to the patreon downloads (in my account) from Sept on, but not July and Aug. Are there codes I need to put in to get those on the website? (I have the kickstarter listed also) Thanks in advance.

Ken Jarosz

Yes, you are fine Kristen. I have added to it along the way so it is now bigger, but it is set up in a way where you will just see your part if you check the downloads.

I have a file called Dec19toJune2020. Is that the same as the 1st year Back Catalog? I've been a Patreon since July.

Kristin Chernoff

Downloading. So far so good.

Arman

I'll send out through drivethroughrpg towards the end of the month when we're sure there isn't anything to workout:)

Website + coupon codes for the win.

GameNight