Toy Comparison and New SR1 Toy!
Added 2024-11-28 09:33:57 +0000 UTCThe SR1 is a stroking and twisting toy that is faster, stronger, more accurate and more stimulating than The Handy, but much quieter than the SR6.
We are releasing (in the next week) a vamX update that adds SR1 compatibility for all vamX poses, and improves vamX compatibility for TempestVR toys.
We've tested the SR1 (by FunOSR) and liked it so much that we made a custom version of the Yoooi Toy Controller to maximize SR1 compatibility and control in vamX.
The SR1, SR6, and other OSR based toys will now be compatible with threesome poses (like St. Andrew's Cross poses), foreplay (hand jobs, foot jobs, breast sex) and more animations (many timeline animations). These toys will also continue matching vamX thrust if the male in VaM slips out of the female.
We've made an Extensive Toy Comparison Table for vamX compatible toys.
Early SR1 models didn't have a desk (table) mount, which we thought was vital for vamX use, so we asked FunOSR to add a desk mount. After giving them feedback on their first desk mount, we now have an additional, exclusive, vamX desk mount also designed.
If you want to order an SR1, so that it will arrive soon after the next vamX release, you can order here (for $150-$250, we suggest with Twist for extra stimulation):
https://www.aliexpress.com/item/3256806623349389.html
Use Coupon VAMXMOUNT to add a free, exclusive, vamX desk mount to whatever version you choose (even if you choose one without a "bracket"). If the coupon is successfully applied, you will only see a notice of a $0.97 discount (there isn't any way AliExpress can provide notice about the free mount).
There are now 2 desk mounts ("brackets").
An adjustable rotating desk mount, which is included in any SR1 package that says “bracket”. This mount can sometimes still rotate after tightening.
An exclusive desk mount designed for vamX that is less adjustable (tilt up-down only) but strong, stable, and very easy to use. A picture of this desk mount is attached to this post.
Having both desk mounts is great, as it increases the likelihood things will easily work with your desk and chair heights.
Comments
After I enquired about the code used and confirmation that it was not being honored I saw my message was read with no reply. After a number of hours I canceled the unit sans mount and the separate mount as it appeared the left hand didn't know what the right hand was doing. Oh well...
JD
2024-12-04 06:40:01 +0000 UTCThe 97 cents discount was the one. I'll update things to be more clear. I contacted FunOSR just saying that someone made a purchase error due to not thinking the mount was included. Talk to FunOSR about either refunding your separate mount purchase, or just refunding the shipping part of that purchase and shipping both together so you get both mounts. You will get the vamX mount either way if you used the coupon.
vamX
2024-12-04 04:50:04 +0000 UTCGetting the run around on my order. Entered the code you provided and it showed 97 cents in discount, not the $1.00 you stated and the shop at AliExpress says my order did not included any mount. So, I had to order the wobbly mount separately and pay another $30 shipping just to have something to mount it on. So much for having a usable product. Will never order from AliExpress again, typical clip joint.
JD
2024-12-03 15:37:42 +0000 UTCAs I said, vamX uses VaMSync to connect with The Handy and Lovense toys. Due to VaMSync no longer being in development, Lovense toy support only have vibration connection. The issue has nothing to do with vamX. The SR1 uses OSR "TCode" which is the fast, immediately responsive type code which is the best for a game. It's not that we couldn't write support for any particular toy, I'm sure we could, but it would take a significant amount of time to support a particular toy. I'm concerned that there aren't enough Patrons who would need connection to the Solace, so that all Patrons would be fine with some update being only Solace connection. This is partly to due with the fact that even if the solace was supported, I think it will be limited in the same ways that The Handy and other similar toys are: The code that controls them is meant for scripts, or slowly changing items. You can send at most ~ 3 updates per second to The Handy. So you can't keep it in sync, you have to know what's about to happen, or ends up very jerky and strange. I prefer to add support for the best possible toys, and we focused on the SR1 because I truly believe that you would have a MUCH better experience in Virt-a-Mate / vamX with the SR1 then with a perfectly programmed Solace connection. That said, if I hear back from perhaps 10 additional people that they all want Solace support and that it's super important, we could devote an update to that.
vamX
2024-12-02 04:54:27 +0000 UTCI appreciate vamx reply, but we all know vamsync has not been supported for a long time now! What is vamx doing to provide support in the future for any new toys which may come along!!! For example, what is the new sr1 toy using to communicate with vamx???? Toy support should be a very important feature of vamx!!! I would also note. vamsync is recognizing the solace and connecting to it through Intiface. It seems to me that the problem is that vamx is not recognizing the connection or is having communication problems with the solace?
Michael Kukuk
2024-12-01 15:33:58 +0000 UTCThe issue lies inside of VaMSync. The author(s) of VaMSync would need to add Solace support but I believe they decided not to upkeep the project. vamX is sending the same data to VaM Sync, so if the Solace doesn't respond, then VaM Sync doesn't support it (it may connect, because it has general lovense compatibility but only for vibration). You would need to convince the authors of VaM Sync to add support. I think qdot was at least partly the author. Also, something like the solace pro would probably be like The Handy, in that it is meant to know in advance where it's supposed to be, not respond to a constantly changing real time signal. These devices, for example when working with scripts, get commands that are simple (like go to point x in time y) and then it has time to execute that command (a whole stroke's worth of time). Devices based on OSR TCode are meant to respond in real time (now go here, now here, now here, 30-60 times per second, etc.). So, I think it would be better to get an OSR based device, like the SR1 or SR6, etc., otherwise game sync is only approximate, and only works on predictable repeating motions (or scripts which can be known in advance).
vamX
2024-12-01 09:03:29 +0000 UTCwhy is lovense solace not working in vamx. is connected in Initiface, is connected in vamsync. Yer dues not respond in vamx!!! You say the new Srt1 works! How about getting the Solace to work!
Michael Kukuk
2024-11-30 20:47:43 +0000 UTC
