BOUTIQUE Dragon Hatchling Clicker Fidgets EARLY ACCESS
Added 2025-01-25 21:03:16 +0000 UTCHey everyone!
I finally jumped on the bandwagon with these fun clicker fidgets lol. And I have to admit they are SO FUN, I've been having a blast! First clicked is this adorable little dragon hatchling that bobs up and down in his egg! I included a more detailed version with his little feet and wings sticking out and a simpler egg version that's easier to print in separate colors :).
Also HUGE shoutout to JazzyPlz for letting me work with her clicker base to perfect the mechanics so it would work with a larger variety of clickers <3 You can check out her awesome original clickers here! https://thangs.com/designer/JazzyPlz
Filaments are D3D white and black, and Ziro Matte Purple Sunset. Multicolor 3MF files included and keychain + non-keychain versions included of each egg!
These are the key switches I used, but they should work with a majority of others as well: https://www.amazon.com/dp/B0CBPR6SVL?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Print recs:
2-3 walls
5-15% infill
No supports
Print with an outer and inner brim for the top piece.
A tiny bit of glue is recommended for extra durability.
Refer to the boutique + Deluxe + Original seller tier download link: https://www.patreon.com/posts/boutique-model-103246509?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
I hope y'all like them! I've got more coming soon.
Thanks so much for all your support <3
Kek
Comments
I usually just use needle nose pliers or cuticle clippers to remove my brims :)
Kirsten McKenzie
2025-03-18 21:12:11 +0000 UTChi - what is a good tool to de-brim the upper portion of the clicker so it fits better in the clicker? I am having a hard time removing the brim inside the upper portion where it needs to fit in the clicker. Thanks so much!
anda Scheianu
2025-03-18 18:11:26 +0000 UTCThese came out in January so they're no longer included in the Welcome pack. But they're public on Thangs now :)
Kirsten McKenzie
2025-03-07 07:12:34 +0000 UTCAre these included in the welcome pack?
Danielle King
2025-03-07 07:11:53 +0000 UTCI got it, same dragon 2 different eggs
Tamara Crain
2025-02-13 20:27:43 +0000 UTCAre there 2 different dragons? They are in the picture but only see one when downloading the files?
Tamara Crain
2025-02-13 20:26:22 +0000 UTCSome filaments can cause more expansion when printing and make things tighter or looser. You can add a touch of superglue to the base to make sure it stays in or also try scaling the base down 0.5% or so and see if that helps!
Kirsten McKenzie
2025-01-30 21:37:02 +0000 UTCwe're having trouble getting the base of the clicker to stay in. we've been doing clickers for months now, so i don't think we're doing anything wrong. the base of the clicker just doesn't seem to have enough to grip onto (the top part of the clicker works fine though.
Brad Greeff
2025-01-30 02:40:19 +0000 UTCYay!!
Kirsten McKenzie
2025-01-28 01:42:02 +0000 UTCYay, I'm so glad! And yessss, I tried to make them as versatile as possible. I'm glad you like them! <3
Kirsten McKenzie
2025-01-28 01:41:17 +0000 UTCI love these . First set is finished and love that your design can use pretty much any keyboard clicker . Awesome design. Thank you
Johann.kinard
2025-01-27 13:26:03 +0000 UTCI can’t wait to try these out when a printer frees up!
Jennifer Jensen
2025-01-26 22:53:44 +0000 UTCTy
Zax Dezignz
2025-01-25 23:17:48 +0000 UTCI hope so!! <3
Kirsten McKenzie
2025-01-25 23:17:23 +0000 UTCYayyy thank you!
Kirsten McKenzie
2025-01-25 23:17:09 +0000 UTCHahaha awesome!
Kirsten McKenzie
2025-01-25 23:17:04 +0000 UTCYes! Or any standard mechanical keyboard switch should work too :)
Kirsten McKenzie
2025-01-25 23:16:55 +0000 UTCYayyy! <3
Kirsten McKenzie
2025-01-25 23:16:33 +0000 UTCAw no!
Kirsten McKenzie
2025-01-25 23:16:28 +0000 UTCThanks so much! Yes definitely!
Kirsten McKenzie
2025-01-25 23:16:23 +0000 UTCI have high hopes these will be the clickers to finally sell well for me. They're too awesome not to!
Maggie Thill
2025-01-25 23:02:49 +0000 UTCThese are so cute!
carrie roehrig
2025-01-25 22:35:24 +0000 UTCI had just sent some sloths to the printer when I saw there. Canceled that (only did one layer of one sloth) and set this up immerdiatly.
Data Diva
2025-01-25 22:32:42 +0000 UTCSo do we have to have this clicker that's in the link in order to make this work with the print
Zax Dezignz
2025-01-25 22:20:29 +0000 UTCSo perfect 🥰 💞
April McAuley
2025-01-25 21:55:40 +0000 UTCOmg and me with 2 printers tied up for 24hrs pol
Andrew Sheffield
2025-01-25 21:49:53 +0000 UTCLove these! Hope there are a lot more coming. Clickers are so much fun.
Jill Woolsey
2025-01-25 21:47:18 +0000 UTCOkay super! <3
Kirsten McKenzie
2025-01-25 21:30:53 +0000 UTCOh good! I can be patient! I have key clickers already that I’ve been using for Jazzy’s clickers. My customers love them, but I think they’ll love these baby dragons even more!!! 🥰
Kristi Pearce
2025-01-25 21:30:20 +0000 UTCAw no!! Thank you though! They'll go up public when they age out of Patreon like all files do :)
Kirsten McKenzie
2025-01-25 21:28:27 +0000 UTCOh nooo!! I’m only subbed to flexi! 😭 These would be perfect in my Fantasy Pet Store! They’re so cute!!! 😍 Is there a way I can buy this file?
Kristi Pearce
2025-01-25 21:27:41 +0000 UTCHahah aw no!!
Kirsten McKenzie
2025-01-25 21:20:18 +0000 UTCDangit! My multicolor printer has 37h remaining but i want to print now!
Patrick Barnes
2025-01-25 21:19:36 +0000 UTCYayyy thank you!
Kirsten McKenzie
2025-01-25 21:14:23 +0000 UTCOmg! These are adorable!
Andrea
2025-01-25 21:14:06 +0000 UTCYay! You're welcome <3
Kirsten McKenzie
2025-01-25 21:11:23 +0000 UTCOh fabulous! Thank you
kaz watts
2025-01-25 21:10:52 +0000 UTCYesssss! <3
Kirsten McKenzie
2025-01-25 21:04:50 +0000 UTCThey've escaped!
Kuu Wolf
2025-01-25 21:04:28 +0000 UTC
