[September Release] Luminora [LUM] Class VoidFrame

EDIT: All of the Luminora files are now up on PWG, RawOBJs/SupportedOBJs/PrePlates/and the T-Pose set for digital kitbashing~
I went with doing a plate for almost all of the poses in the Turntable set so there's some decent variety there~
It might take a minute for them to actually show up in your downloads.

And if it's not poppin' up usually checking for new downloads will pull things in.

~Pipes


It's that time again, and I've got a bunch of things for this set x'D

First off, we've got the Luminora [LUM] Guidance Class VoidFrame. I didn't originally plan for this set to be quite this large, but that's just the way things go sometimes x'D This kit builds in the same way as the Vacarsield set, and is for the most part completely compatible with previous. This means arms/lowerbodies/heads/torsos/etc can all be swapped around without any scaling necessary, and this will continue much throughout the rest of the VoidCraft~
I've put together a handful of renders to showcase some different ways this kit can be built up as there are many, and overall I'm pretty pleased with the variety. I also wanted to make a bit of a centerpiece character out of the set near the end of things. The big Halo is one I'm currently test printing now, but I imagine it should be fine. However, as with all infantry scale stuff, some of this set is a bit fragile, so care with removing supports is necessary.
I'm really looking forward to seeing what kind of variants you all build and if you plan on doing any mix'n'matchin with the Vacarsield~

Next up, with all past and future VoidCraft releases, I will be including this set of inlay bases (As well as a standard set of the generic bases I've been including) This will cover a wide range of commonly used base sizes, and be on theme with the VC (if you're into that~) This also has the texture plate that I used to make the inlays, so you can also boolean your own~ (for easy magnetization, you can punch a hole directly through the Inlay base, prior to adding the inlay, and a 2mm x Xmm magnet will fit flush with the bottom~)

Lastly I've also added a lil 6 sided counter, but it could also be scatter terrain or an objective marker or token, (Or whatever you want to use it as x'D)
As always, the RawOBJ filesets will drop on the 4th of September with presupports following as I get them back from Atlas3DSS. And I'm really looking forward to printing some of these~

Next on the docket is the Arcus [ARC] Long Range Class VoidFrame which I've included the initial concept at the end of the pics~ And that's all for September! See you in the first WIP post for Oct~ (Or catch me on twitch were I've been streaming a lot of my modeling sessions~)
~Pipes