TD-1 Firmware V1.0.2
Added 2024-06-22 23:35:28 +0000 UTCHello All,
I have made some improvements to Error handling and POST checks. No this is not the color optimization firmware many are hoping for, but I am still working on that, and when/if ready, I will be releasing it to active paid Patreon members first.
This update will no longer hang on the check for the display if one is not detected. Instead, it will log the error and move on to check for the color sensor and the lux sensor. This allows you to also run TD-1 headless (no screen) if you wish. Obviously, this will require that you are using either the data collection script or be connected to HueForge. To flash using HueForge, you will want to delete any old update files from "yourHueForgeDirectory"\TD-1\update. Then you will need to extract the contents of the update.zip into that same directory.
Almost all other errors will now be properly logged as well. This will provide a much better troubleshooting process in the event that one of the POST checks fails.
I also corrected the issue that can sometimes occur when scanning filaments that are extremely high TD where it would report back a td value of 0.1.
The image below is what your version should be at once the update is complete. To update, you can use either the “Updater v3.py” script or HueForge version V0.7.1 or newer.
This version is not included in the main uf2 file, so you will need to update to this firmware version even after flashing the initial firmware from the uf2.
