Samsung OLED G9 Calibration & ICC Profile
Added 2023-06-28 22:24:06 +0000 UTCThese are calibration settings to get accurate color at the D65 white point in HDR in DCI-P3 using a spectrophotometer, colorimeter, Calman Ultimate, and a pattern generator for the best accuracy possible.
Note: THIS IS FOR GAME MODE ONLY & YOU MUST HAVE THE HDMI PORT SET TO PC MODE!!!
HDR Calibration
WITH HDR & AUTO HDR ENABLED IN WINDOWS!!!
1. Go to Connection, Game Mode Settings (Turn Game Mode On), Game Picture Expert, HDR10+ GAMING: Basic & Game HDR: Basic
2. Go to Picture, Expert Settings, Color, & set
Brightness: 50
Contrast: 50
Sharpness: 10
Color: 25
Contrast Enhancer: Off, (HDR Tone Mapping: Static for more accuracy & dynamic range / Active for more full screen brightness).
Color Tone: Warm 1
Gamma: ST.2084
St.2084: -1
Peak Brightness: High.
3. Under White Balance Set (Note panel variance means 100% accuracy between all panels may not be possible, but in my testing they are typically close).
R-Gain: -3
G-Gain: 0
B-Gain: 4
R-Offset: 1
G-Offset: 0
B-Offset: 0
4. Under Color Space Settings Set Color Space: Custom & Color Gamut: DCI-P3. (Note panel variance means 100% accuracy between all panels may not be possible, but in my testing they are typically close).
ON CURRENT FIRMWARE DCI-P3 COLOR CHANGES DO NOTHING.
5. Set Windows SDR Content Brightness to 100%.
6. Make Sure 10bit Color is Enabled in the Nvidia Control Panel under "Change resolution"
7. Set Dynamic Range to Full.
sRGB Calibration
WITH HDR & AUTO HDR DISABLED IN WINDOWS!!!
1. Go to Picture, Expert Settings, Color, & set
Brightness: 50
Contrast: 50
Color: 25
Contrast Enhancer: Off
Color Tone: Warm 1
Gamma: 2.2
Peak Brightness: High.
2. White Balance (Note panel variance means 100% accuracy between all panels may not be possible, but in my testing they are typically close).
R-Gain: -4
G-Gain: 0
B-Gain: 4
R-Offset: 1
G-Offset: 0
B-Offset: 0
3. Color Space Settings: Custom & BT.709 (Note panel variance means 100% accuracy between all panels may not be possible, but in my testing they are typically close).
ON CURRENT FIRMWARE BT.709 COLOR CHANGES DO NOTHING.
4. Make Sure 10bit Color is Enabled in the Nvidia Control Panel under "Change resolution"
5. Set Dynamic Range to Full.
6. Install ICC Profile
Comments
i need help with this :( can anyone help?
2023-11-25 19:36:44 +0000 UTCLike Soran, i am also wondering about settings for the non smart feature version of the monitor (S49CG934SU). Would love it if there was an update to include that version ๐
2023-11-25 01:53:31 +0000 UTCI was wondering, I have the g9 OLED without the Smart hub thing. The settings are a bit different. Under white balance settings there are no gain and offset values only one slider for each color, how would you recommend adjusting the colours in this case? There is also no option for Color space & colour gamut, what would you recommend in this case? Is there maybe some way to adjust these in Windows or maybe it's not necessary? Also when adjusting Everything else by your recommendations, I find the Picture too yellow, because of the warm1 settings. I would prefer Standard because white looks more white in this case to me. Do you think this is bad for colour accuracy? And lastly I find the picture in general too dim and kind of washed out when putting peak brightness on high, then again on medium it's better, but you loose detail in dark areas. Bit this is because of the 400nits limiting the display to be brighter in general.
2023-11-24 16:47:57 +0000 UTCWill this calibration work good for PS5 players?
2023-11-22 02:28:29 +0000 UTCIf you have questions please reach out to me on Discord.
2023-11-07 17:14:22 +0000 UTCcan i use these settings while having my DP port connected to the monitor
2023-07-23 08:19:31 +0000 UTCI can't enable hdr on g9 oled
mlgpm112
2023-07-22 06:22:44 +0000 UTC
