(Black Dranzer) Beyblade Kit Card 3D Print Files
Added 2024-07-12 19:30:02 +0000 UTCIMPORTANT NOTE: Please use double-sided tape or glue between the top layer of the Beyblade and the bearing. This is because we need to cease the relative motion between the inner and outer cylinders of the bearing. If we don't do that, the Beyblade is still going to spin, but it'll spin in a much crappier way (it'll stop spinning much sooner). I forgot to mention this in the video, apologies for that.
Same as the Dragoon file, I print these in PLA at 0.16mm layer height with a 0.4mm nozzle. I've included both, the 3MF and the STL files for this.
Comments
I'll try to do that in a bit when I come back to beyblade stuff but I can't make any promises about when I'll be able to do it.
Spilled Cereal
2024-07-24 07:50:56 +0000 UTCCould you desing a simple small-ish arena? maybe somtheing modular that way the design can be updated over time. Some with pitfalls and some without, something like that
Joshua Garza
2024-07-24 03:44:04 +0000 UTC
