(Dragoon) Beyblade Kit Card 3D Print Files
Added 2024-07-12 19:30:01 +0000 UTCIMPORTANT NOTE: Please use double-sided tape or glue between the top layer of the Beyblade and the bearing. This is because we need to cease the relative motion between the inner and outer cylinders of the bearing. If we don't do that, the Beyblade is still going to spin, but it'll spin in a much crappier way (it'll stop spinning much sooner). I forgot to mention this in the video, apologies for that.
I print these in PLA at 0.16mm layer height with a 0.4mm nozzle.
I've included both, the 3MF and the STL files for this so you should be good regardless of whether you have a printer with AMS or a regular printer.
Comments
there are different sizes
Zeyad Bassiouny
2024-09-14 19:55:41 +0000 UTCwhat size bearing
Zeyad Bassiouny
2024-09-14 19:55:28 +0000 UTCits a normal skateboard bearing
Altti Tammelin
2024-07-28 10:35:39 +0000 UTCwhat size is the bearing you used?
Sherri Kelley
2024-07-27 00:03:49 +0000 UTCmight be because of the layer height difference, it works fine on .16 for me...
Spilled Cereal
2024-07-19 08:38:19 +0000 UTCOf course!!
theo lewis
2024-07-19 08:38:17 +0000 UTCSure thing. hope you're gonna credit me though! (link my YouTube channel please!)
Spilled Cereal
2024-07-19 08:37:40 +0000 UTCI printed this on a neder 3 .2mm lay height and .4mm nozzle, the bey seems to have printed fine but the gear that goes into the launcher does not want to fit, it seems that the bridge between the gear the spinny thing that is outside the launcher is 2 big idk maybe it could be the layer height difference???
Crwolfgames
2024-07-18 20:09:55 +0000 UTCHey Toast, this is the first Video of yours I have seen but thought it was amazing. Im slicing on prusaslicer with a .4 nozzle and the support pillars under the "rotor"?..(wording from someone elses comment)/the gear dont show up. I would love to modify the model so i can print with few headaches. Is this okay with you? I would also love to share this and possibly my modified design on thangs (3d model sharing website) where I have a small community?
theo lewis
2024-07-18 10:17:00 +0000 UTCemail me, and we can discuss about this - business.toastchannel@gmail.com
Spilled Cereal
2024-07-16 23:59:43 +0000 UTCDoes any of the paid tier allow the sale of these?
Morialkar
2024-07-16 23:54:38 +0000 UTCI used the anycubic slicer with the stl, let me try again using another slicer and I'll report back
Thrap
2024-07-15 12:01:52 +0000 UTCHmm, that is strange, are you using Bambu slicer or is it some other slicer? If you're not able to resolve this, let me send you the files in another format, that might work (I'm not sure)
Spilled Cereal
2024-07-15 10:49:29 +0000 UTCvery nice model, but when slicing using a .4 nozzle the supports under the rotor do not appear for me.
Thrap
2024-07-15 10:22:04 +0000 UTC
