Patreon Exclusive: Jack-O-Lantern Set!
Added 2022-10-06 19:59:26 +0000 UTC***THIS FILE IS NO LONGER INCLUDED FREE WITH SUBSCRIPTION.
It can be purchased once re-released according to this Schedule.
Hey Everyone! Here's something a little different. I wanted to get one last Halloween themed model in before we get too far into the month, so this is my take on the classic Jack-O-Lantern! There are five different printing options included in this set:
1) Ornamental version
2) Lidded Candy Dish/Bowl
3) Lidded Dish with Cut out Eyes, Nose, and Mouth
4) Keychain
5) Refrigerator Magnet (this one has a 90 degree corner, so could be printed bigger as a decorative piece to put flush against a wall) For magnets use 10mm x 2.6mm magnets like These On Amazon.
This was a really fun sculpt to explore, and making a lidded dish was a lot trickier than I anticipated, haha! I hope you enjoy it!
*Click Here to go to the Pinned "the Hub - Info and Current Download Links" post*
*The Jack-o-Lantern Set will only be available as a free download until November 30th. Will be available again in March 2023, for purchase.
Printing is pretty straightforward. Most variants shouldn't need supports*, unless you want some inside the mouth. I found the overhangs performed fine without them.
*the cutout eyes, nose, mouth version will need supports!
-5%-10% infill should be sufficient.
-Magnet: I would use 10% Lightning Infill like all magnets, to keep the weight down.
*Click Here to go to the Pinned "the Hub - Info and Current Download Links" post*
*The Jack-o-Lantern Set will only be available as a free download until November 30th. Will be available again in March 2023, for purchase.
Comments
Has anyone been able to use supports on the one with cut out eyes that are easy to remove? I have tried tree supports in Bambu slicer and just struggle trying to get them off.
Jay Butcher
2023-09-28 23:16:50 +0000 UTCI painted them by hand. This was made before I had a Bambu. For MMU, I would suggest tracing the inside shapes with the circle tool to create a complete outline, and then filling in the middle with the fill tool.
MatMire_Makes
2023-09-06 02:32:20 +0000 UTCDid you paint the eyes black or print it like that? Have a bambu with ams and am finding painting the eyes not easy at all. Thanks
Jay Butcher
2023-09-06 02:17:03 +0000 UTCIt is the 3rd link in the Vault section of the pinned download links post.
MatMire_Makes
2023-08-14 03:13:15 +0000 UTCwhere are these files?
Fuszybear
2023-08-14 02:57:37 +0000 UTCThank you!
Dusty Wagner
2022-11-10 15:59:04 +0000 UTCYup! It’s in the pinned “Current Download Links” post.
MatMire_Makes
2022-11-09 20:28:25 +0000 UTCCan I still get this by chance?
Dusty Wagner
2022-11-09 20:21:59 +0000 UTCAny tips on the supports for the cut-out jack-o-lantern?
Zombie Saint
2022-10-12 09:04:48 +0000 UTCI just released that update. Did you receive a notification?
MatMire_Makes
2022-10-07 19:43:20 +0000 UTCI agree with Ali! I would love to see versions with the eyes and mouth cut out for lighting! Thanks!!! These are awesome though!
Brian Banks
2022-10-07 19:40:31 +0000 UTCHi! I just painted the stem on mine, but that's a good idea! It would more likely have to be a glue-in option vs snap-fit. I'll explore it.
MatMire_Makes
2022-10-07 00:38:03 +0000 UTCWould it be possible to do one with the lid where the stem is separate so it can be done in a different color and snapped in for those of use with printers that only do one color at a time?
Darlisa Riggs - CatBird Studios
2022-10-07 00:23:40 +0000 UTCI forgot to add that. 10mm x 2.6mm neodymium magnet, like these on Amazon: https://www.amazon.com/SMARTAKE-Refrigerator-Magnets-Multi-Use-Whiteboard/dp/B081GDWRZT?ref_=ast_sto_dp&th=1&psc=1 I'll add a link to this post and current download post.
MatMire_Makes
2022-10-06 21:34:36 +0000 UTCWhat size magnets do you recommend for your refrigerator magnets? This pumpkin print as well as the bat, bearded dragon head and the others you have made. I have printed a few of them but not added any magnets yet. Thanks in advance.
Rosalynda Epley
2022-10-06 21:32:08 +0000 UTCI'll work on one. That version would definitely need supports in the mouth.
MatMire_Makes
2022-10-06 20:26:11 +0000 UTCLove this! I haven’t loaded it up in slicer but is there any chance to make one where the eyes and mouth are cut out? I’m printing all my decorations this year and using led candles
Ali Adcock
2022-10-06 20:14:54 +0000 UTCLove ❤️
Daphne Walker
2022-10-06 20:00:05 +0000 UTC
