PEPE THE MEME FROG
Added 2022-06-17 17:38:13 +0000 UTCPepe The Meme Frog 3D model for Printing
The movement is very fluid and it prints without supports!
No supports or assembly required. Just slice and print!!
Feel free to Share your Makes and tag me on Social Networks if you print it!
You can support me here:
Instagram: https://www.instagram.com/toonzfactory/
Thanks for your support, you guys are the best! ;)
3D PRINTING SETTINGS
*A good first layer is mandatory for the print to success
*No Supports
*Print-in-place (no assembly)
*PLA works great
*make sure you have good bed adhesion if you are printing small (but don't go too small)
*After printing be careful linking the spikes. If you push to hard they can break, They might be tight at first but will loosen up as you play with it.
