はい、皆さん。
今回の規約改定により今までの作品ほぼすべてを非表示にする必要があります。
このままではコンテンツの危機です!どうにかならないかと規約を目を皿にして見ていたところ……何やら抜け穴のような注意書きがあるではないですか!?
Yes, folks.
We have to hide almost all of our previous works due to this revised terms and conditions.
If we don't do something about it, our content will be in jeopardy! I was looking at the terms and conditions with my eyes open to see if there was anything I could do about it, and then I saw a note on ...... that seems to be some kind of loophole!
是的,朋友们。
由于修订后的条款和条件,我们不得不隐藏几乎所有以前的作品。
如果我们再不采取措施,我们的内容就岌岌可危了!我睁大眼睛看着条款和条件,想看看有没有什么办法,然后我在 ...... 上看到了一条说明,似乎是某种漏洞!
ふむ、需要のほどは分かりませんが試しにやってみましょうか。
[Content that opens a work generated by AI generation or the technology associated with it does not qualify as "AI-generated content".]
Hmmm... I don't know about the demand, but let's give it a try.
[打开由人工智能生成的作品或与之相关的技术的内容不属于 "人工智能生成的内容"。]
嗯... 我不知道需求如何,但让我们试一试吧。
以下のような絵がStable Diffusionで生成されましたが少し様子がおかしいです。
The following picture was generated by Stable Diffusion, but it looks a little strange.
下图由稳定扩散生成,但看起来有点奇怪。
部分的にinpaintで直す方法もあるのですが、先ずはt2i(text to image)で神頼みします。何気にプロンプト初公開!はい、クソ長いですね。モデルは内緒。
There is a way to fix it partially by inpainting, but I'm going to use t2i (text to image) first, for God's sake. What the heck, this is the first time I've published a prompt! Yes, it's fucking long. Don't tell me the model.
有一种方法可以通过内绘来解决部分问题,但看在上帝的份上,我打算先用 t2i(文本到图像)。管它呢,这是我第一次发布提示!是的,真他妈长。别告诉我模式。
シード値を固定したままステップ数を変えながら何パターンか生成してみます。
I'll try to generate several patterns with different number of steps while keeping the seed value fixed.
我会尝试用不同的步数生成几种模式,同时保持种子值固定不变。
なかなか良い感じなのではないでしょうか?
謎の物体が出現しているのでinpaintでまとめて消し去ります。
It looks pretty good, doesn't it?
Mysterious objects are appearing, so I'll erase them all together with inpaint.
看起来不错吧?
神秘物体出现了,所以我要用内喷涂把它们一起擦掉。
inpaintは緻密な作業になるのでブラウザ表示を200%くらいまで拡大して作業してます。消し去りたい箇所をinpaintで黒く塗りつぶして再生成します。(消したい箇所が複数ある場合は実際には1箇所塗り潰し→再生成を繰り返した方が良い結果を得られます。3箇所同時に良い感じに再生成される確率は低いですからね)
Since inpainting is a very detailed process, I zoom in the browser view to about 200%. The areas you want to erase are painted black with inpaint and re-generated. (If there are multiple areas to be erased, it is actually better to repeat the process of inpainting one area and then regenerating it, since the probability that all three areas will regenerate well at the same time is low.)
由于涂抹是一个非常细致的过程,我将浏览器视图放大到大约 200%。要擦除的区域会被油漆涂黑,然后重新生成。(如果有多个区域需要擦除,实际上最好重复涂抹一个区域然后再生的过程,因为三个区域同时再生好的概率很低)。
マスク箇所は「埋める」設定で周辺の背景に溶け込ませます。
シード値はサイコロで-1にリセット。こうしないと絵が変わりません。
何度か生成することで良い感じになります。
Masked areas should be "filled" to blend in with the surrounding background.
The seed value is reset to -1 with a dice roll. If you do not do this, the picture will not change.Generate several times to get a good result.
蒙版区域应进行 "填充",以便与周围背景融为一体。
掷骰子会将种子值重置为-1。如果不这样做,图片将不会发生变化。
最後に隠蔽処理(モザイク処理)です。
ペイントは卒業して今はMediBang Paint Pro(未課金)を使用しています。
pixivガイドライン(画像全体長辺×1/100程度を算出したピクセル平方モザイクとする)に則り、画像サイズが1024なので10px程度のモザイクを掛けます。
The last step is the hiding process (mosaicing).
I graduated from Paint and now use MediBang Paint Pro (unpaid).
In accordance with pixiv guidelines (pixel square mosaic calculated about 1/100 of the entire image long side x 1/100), the image size is 1024, so I apply a mosaic of about 10px.
最后一步是隐藏过程(镶嵌)。
我从画图软件毕业,现在使用 MediBang Paint Pro(未付费)。
根据 pixiv 的指导原则(像素方形马赛克的计算约为整幅图片长边的 1/100 x 1/100),图片大小为 1024,因此我应用了约 10px 的马赛克。
以上で完成です。パチパチパチ
That is all. Crackle crackle crackle
仅此而已。噼啪噼啪
如何でしたか?初めての試みだったので1作品作るくらいの時間が掛かりましたorz
今回はありませんでしたが、変形した手や指を手動で直してたりもするのでそのうち解説してみようかな?でも誰かが動画で上げてるだろうから不要かな?
また何か思い付いたらやってみます。
How was it? It was my first attempt, so it took me about as long as it takes to make one work orz
Although it didn't happen this time, I might try to explain it soon, since I also manually fixed the deformed hands and fingers. But I'm sure someone has already uploaded a video of it, so I don't think it's necessary.
I'll try again if I think of something else.
怎么样?这是我的第一次尝试,所以我花了很长时间来完成一个作品。
虽然这次没有成功,但我可能很快就会尝试解释一下,因为我还手动修复了变形的手和手指。不过我相信已经有人上传了视频,所以我觉得没必要。
如果我想到其他办法,我会再试一次的。