Dungeon Stone Torch Pillars
Added 2022-12-30 23:10:04 +0000 UTCPillars get the torch treatment! The photos are only showing one of the 5 versions of torches on the pillars. Each pillar has the option of 1, 2 (L), 2 (either side), T and all four sides.
There are SO many variations I could make for this, so I decided to go with the pillars that are the same height as most tiles. You should be able to fit a battery in the 2x2 based ones (that's actually part of why I added 2x2 pillars this go around), but the 1x1's can be solved by running wires to another tile that has the battery in it. There's a large central hole inside each of these, so running the wires should be fairly easy.
If you really want torches on the taller pillars, just reach out to me individually and I'll bang out the ones you want. It just would be a lot of files that I'm not certain would get used. The 40 variations here felt sufficient.
You can find instructions for the torches here: https://www.patreon.com/posts/64536544
Grab the files
- Attached here
- In the OpenForge Dropbox under tiles/dungeon_stone/misc/full_pillar#torch
Comments
I feel i'm missing a bit. Which floor tile do i need and which part to hold the torch?
Kevin Toet
2023-03-02 21:54:28 +0000 UTCHiya. Where is the little bit that actually holds the LED in the pillar slot? Nevermind. I found it in a previous torch wall set
Craig Trunzo
2023-01-02 20:09:47 +0000 UTCThese are great! But I'm a bit confused. Why do the eroded versions not have tops, but the block versions do?
Rich Brungard
2023-01-01 15:49:01 +0000 UTCYes Yes yes yes yes yes yes yes
Schadow
2022-12-31 02:12:01 +0000 UTC
