High Strategy: The Bomber Tanker Team (15th Air Force Heritage) 1980 USAF

more at http://quickfound.net/

15 AF HERITAGE - HIGH STRATEGY - BOMBER AND TANKERS TEAM

GENERAL HISTORY OF THE 15TH AIR FORCE (SAC) WITH EMPHASIS ON AIR REFUELING, PRE-WORLD WAR I, AND POST-WORLD WAR II.

Originally a public domain film from the National Archives, slightly cropped to remove uneven edges, with the aspect ratio corrected, and one-pass brightness-contrast-color correction & mild video noise reduction applied.

The soundtrack was also processed with volume normalization, noise reduction, clipping reduction, and/or equalization (the resulting sound, though not perfect, is far less noisy than the original).

https://en.wikipedia.org/wiki/Aerial_refueling

Wikipedia license: http://creativecommons.org/licenses/by-sa/3.0/

Aerial refueling, also referred to as air refueling, in-flight refueling (IFR), air-to-air refueling (AAR), and tanking, is the process of transferring aviation fuel from one military aircraft (the tanker) to another (the receiver) during flight. The two main refueling systems are probe-and-drogue, which is simpler to adapt to existing aircraft, and the flying boom, which offers faster fuel transfer, but requires a dedicated boom operator station.

The procedure allows the receiving aircraft to remain airborne longer, extending its range or loiter time on station. A series of air refuelings can give range limited only by crew fatigue and engineering factors such as engine oil consumption. Because the receiver aircraft can be topped up with extra fuel in the air, air refueling can allow a takeoff with a greater payload which could be weapons, cargo, or personnel: the maximum takeoff weight is maintained by carrying less fuel and topping up once airborne. Alternatively, a shorter take-off roll can be achieved because take-off can be at a lighter weight before refueling once airborne. Aerial refueling has also been considered as a means to reduce fuel consumption on long-distance flights greater than 3,000 nautical miles (5,600 km; 3,500 mi). Potential fuel savings in the range of 35–40% have been estimated for long-haul flights (including the fuel used during the tanker missions).

Usually, the aircraft providing the fuel is specially designed for the task, although refueling pods can be fitted to existing aircraft designs if the "probe-and-drogue" system is to be used. The cost of the refueling equipment on both tanker and receiver aircraft and the specialized aircraft handling of the aircraft to be refueled (very close "line astern" formation flying) has resulted in the activity only being used in military operations. There is no known regular civilian in-flight refueling activity. Originally employed shortly before World War II on a very limited scale to extend the range of British civilian transatlantic flying boats, and then after World War II on a large scale to extend the range of strategic bombers, aerial refueling since the Vietnam War has been extensively used in large-scale military operations. For instance, in the Gulf War and the Iraqi invasion of Kuwait and the Iraq War, all coalition air sorties were air-refueled except for a few short-range ground attack sorties in the Kuwait area...

The flying boom is attached to the rear of the tanker aircraft. The attachment is gimballed, allowing the boom to move with the receiver aircraft. The boom contains a rigid pipe to transfer fuel. The fuel pipe ends in a nozzle with a flexible ball joint. The nozzle mates to the "receptacle" in the receiver aircraft during fuel transfer. A poppet valve in the end of the nozzle prevents fuel from exiting the tube until the nozzle properly mates with the receiver's refueling receptacle. Once properly mated, toggles in the receptacle engage the nozzle, holding it locked during fuel transfer.

The "flying" boom is so named because flight control surfaces, small movable airfoils that are often in a V-tail configuration, are used to move the boom by creating aerodynamic forces. They are actuated hydraulically and controlled by the boom operator using a control stick. The boom operator also telescopes the boom to make the connection with the receiver's receptacle.

To complete an aerial refueling, the tanker and receiver aircraft rendezvous, flying in formation. The receiver moves to a position behind the tanker, within safe limits of travel for the boom, aided by director lights or directions radioed by the boom operator. Once in position, the operator extends the boom to make contact with the receiver aircraft. Once in contact, fuel is pumped through the boom into the receiver aircraft.

Cameras in place of a visual boom control station as used on an Australian KC-30A.

While in contact, the receiver pilot must continue to fly within the "air refueling envelope"...