[poll] What is you hardware

What seems to be the problem? can you tell us more about your hardware (CPU, headset)? Have you updated your drivers?

Ben Dum

im having issues getting the game to startup on my pc im running an 2080ti

Shamus McMuphon

Refund sent. Hope to have you back soon.

Ben Dum

yes

Jiří Brada

I'm afraid RX 570 is below the minimum recommended. you would need at least a RX 580 to run the game in low quality. We will start working on a lite version of the game to be ran on the Quest 2 as a standalone. This version will be ok on your hardware and should come in a month or two. In the meantime, would you like a refund?

Ben Dum

Radeon RX 570 and i set everything on low

Jiří Brada

This issue usually is due to a weak GPU. What's yours?

Ben Dum

it help me but when i click on girl and on day or night its start shaking and crash

Jiří Brada

Hello and sorry for the inconvenience. First, please note that ComeCloser is exclusively playable in VR and won't work whithout the VR on. Also note that SteamVR is mandatory. The white pillar problem is most likely due to SteamVR not being found by the game. You can try this: - restart SteamVR, - restart your headset and re-confirm connexion to the PC, - update SteamVR, your Quest and the firmware, - if you are using Virtual Desktop, switch to cable. Hope it helps!

Ben Dum

hello can u help i start game and its freeze on white pillar and blue sky i cant do anything my specs are AMD ryzen 5 2600 Radeon RX 570 and i use quest 2 but i cant start it even without headset

Jiří Brada

WMR is not natively supported, but with SteamVR you can easily bind the actions on the buttons of your controller. Go to SteamVR, controllers, binding manager, custom. There are only 4 actions to bind: - bind "interact holo" and "continue narration" to the trigger, - bind "grab holo" on the grip, - bind "recall holo" on any button under the thumb.

Ben Dum

im having an issue in wich i can move my hands, but cant interract with anuthing or teleport with my WMR controlllers

Jan M.

Thank you very much for your feedback! We are planning to ass a very convenient tool to aligne the virtual world with the real one, Hopefully this will solve the issue of the altitude slider, which is far from perfect indeed. About the button to change pose I understand. You can still go into SteamVR -> controller bindings -> custom bindings to change it to whatever button you would like. the action is called "continue narration".

Ben Dum

I subscribed and supported THREE different VR XXX Titles last night. Yours was the last of three I tried, all similar. Yours was the only one with hand collision and allowing me to move the other person. Yours was the only one with any avatar (the magic pecker) and the only one where I did not have to use a 3rd party app to adjust my altitude. Best in show so far, and very close to VAM (an honor). My only issues occurred as mere annoyances, like its kind of difficult to make the magic pecker and altitude align correctly. OH, no good having the next pose on the trigger (index) need to move that to a button not involved in grab movements (like trigger is), either way I'm gonna smack that trigger by accident literally all the time.

gp

Running a 3950x, 128GB of RAM and a RTX 3090 FE. Quest 2 with a TP Link Archer 1800 router, running through Virtual Desktop. I have not noticed any low performance (which is to be expected given this hardware, just offering this as a data point).

Thanks for the information. It's very useful.

Ben Dum

Yes I have been troubleshooting over the last few weeks, I have up to date VD, display driver & OS.. I originally notice a system error in the event logs but that is no longer the case: Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll Faulting module path: C:\WINDOWS\SYSTEM32\d3d11.dll Facebook is due to release Air Link so we will see if it change anything compare to VD. But I did try the Link Cable and the issue was still present (it actuallu closed the link connection)...

TEFY

It still lags, and if I shake my hands too much, which isnt a lot shaking, then they kind of get stretched and look weird. The usage was caused my unnecessary programs starting up automatically, and medal using gpu instead of cpu and some other settings in medal.

Delle

i think nvidia bragged about 3 games running at 60fps in 8k during the launch, all of them using dlss to make the job easier. i believe with the extra pixles rendered before the image is morphed for the lens the reverb g2 is pushing 9K pixles, and it wants to run at 90fps not 60! so 100% resolution on the g2 isn't really something even the rtx3090 can cope with that said even with the res at 50%-70% i'm getting a sharp enough image with most of the graphic options turned up. anti-aliasing is a good one to disable, many older games optimised for the first gen VR headsets have that on by default and it has absolutely crippled performance for me. so i don't think my use case is one to worry about. i'm not even sure dlss 2.0 works for VR. it would need tech like that to have a chance of full res at 90fps. it's just not something i expect from most games. i suspect it will take another generation or 2 before there is a graphics card that can push the reverb g2 to the limit. i know this isn't the most helpful of information, so i guess this is more about what not to try and fix :)

Alex

Thanks, we have had several reports of that behavior using AMD 5xxx and Quest 2 via Virtual Desktop. We suspect that VD is creating some issue in that configuration. Is VD up to date? Have you tested with the link cable instead?

Ben Dum

Do you have a decent frame rate now you have managed to free the memory? What was causing the memory usage?

Ben Dum

Oculus Quest 2 via Virtual desktop on AMD Ryzen 7 3700X & AMD Radeon RX 5700XT. game load working fine within menu then after selecting a scene game load display a couple of frame and glitches.

TEFY

CPU: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz 3.70 GHz GPU: 2070 RTX Nvidia 16 GB ram Headset: Index I get low frames, and I got it fixed so that I now have about 10 GB ram available when I dont have anything open. So I have 10 GB Ram for the game.

Delle

Thanks you for your feedback. What headset do you use? by low fps you mean more like 15fps or 50 fps? Our 2070/Valve Index dev machine gives a solid 50fps with the default quality settings 'high, high, high, medium". Graphics quality to high is pretty intense and should be avoided for most hardware.

Ben Dum

Sorry for the inconvenience. Can you tell us more about your hardware? CPU, GPU and headset?

Ben Dum

Note that ComeCloser uses the GPU a lot but mainly for GPGPU computation, which does not depend on the resolution (cloth and hair physics). You can try to set the graphics quality to medium, which mainly sut down the ambiant occlusion, and try the full resolution of your Reverb. It should be ok with your RTX3090

Ben Dum

9900k 2080 super 32gb ram, game was playable but quite low fps

3070 should be ok with the default settings "high, high, high, medium". Which CPU and headset do you use?

Ben Dum

Thanks for your feedback and sorry for the inconvenience. The RX580 has been reported to work almost ok with all settings to low in v0.3 and is considered to be bellow the minimum requirements unfortunately. That being said, we will create a lite version of the game to be run on standalone Quest, that could be release for older PC too.

Ben Dum

Thanks for pointing this out, Unfortunately we can't edit the poll apparently. Just select i5/i7 option.

Ben Dum

Where is the option/box for the game does not run beyond the menu selection screen?

TEFY

with the crazy resolution of the hp reverb g2 i have to lower the resolution a bit in all my games. running a ryzen 3900x with an rtx3090!

Alex

Even with a 3070 it struggles a lot at the highest settings

Tha Derpy Division

I can't run the game currently, using a rx580

No i9 option