Warhawk Rambo Animated

This model will only be on Patreon for 14 days.
After January 09, it’ll be gone—and only unlockable for members with 6+ months.

So if you want him, now’s the time!
Have fun printing, friend!

"Switch the wall generator to Arachne in Bambu Lab Studio so that the smallest color details, like pupils, will print."

"Cambia el generador de paredes a Arachne en Bambu Lab Studio para que se impriman a color los detalles más pequeños como las pupilas."

"Mude o gerador de paredes para Arachne no Bambu Lab Studio para que os menores detalhes em cores, como as pupilas, sejam impressos."

(Download Link at the end of the post)

The files are compressed in a Zip file, decompress it to obtain the STL files, WinRar is a free software you can download from google

Assembly : Filament & Resin. / Can be scaled up

If you are having troubles keeping the parts from falling from the bed use a raft.

Don't add extra supports to the files, they are not needed and it will cause troubles.

Important: Some small parts like the hands can be challenging, print it slow at 30 mm/s even 20,    200 is a good temp for the nozzle

Print the files at 40 mm/s (speed) faster than than will cause problems especially in Print in Place models, Nozzle temp between 205 and 215

 use your plastic Flow (Extrusion Multiplier in Simplify 3D) at 0,90 so the parts can fit correctly

-Print in a glass bed using any hold hair spray (this is optional, but we've been printing this way for years, nothing give you better looking and flat first layers)

Have a nice weekend people!!

3D PRINTING SETTINGS

Plastic Flow / Extrusion Multiplier = 0,90 (Mandatory)

Primary Layer Height = 0,1600 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2 / 3

Temperature= 215°C  / 205° (it's up to you)

Default Printing Speed= 40,0 mm/s

Outline Underspeed= 40%

Infill Percentage= 12% (or more, it's up to you)