Bit clicks and Magnet shelf

Hii!!

Happy Friday!! I am happy to drop the rest of the this weeks pack, bit clicks and magnet shelf!

For my followers you can grab the magnet shelf free here - thangs

🌟 bit clicks 🌟

Preview: Youtube shorts

• 3 walls, 15% gyroid or 3D honeycomb infill, No supports

• I get my Switches (the part that clicks) from amazon. The listing is from Canadian amazon: Kailh box Jade switches

• Clipping the metal tabs isn't required but I do recommend it because they are sharp. Make sure to clip them away from your face.

• Please make sure that you take your time with pushing the face in to ensure it is pushed in straight.

• Put the keychain in first before assembling the clicker

• I designed these to use as flush objects! they are great to flush into!

🍁 Magnet shelf 🍁

Preview: Youtube shorts

• 3 walls, 15% gyroid or 3D honeycomb infill, No supports

• I used 5x2 magnets (5x3 will fit too), I buy them from amazon. CA. You can find them here - Amazon Magnets

• The magnet holes are hidden within the body of the leaves and shelf and you will need to pause the printer in order to place them into the holes. If you do not have a magnetic print bed don't use the magnet version. To check place magnet on print bed and see if they stick.

• You will need to add a pause in the slicer prior to printing in order to insert the magnets. at 0.2 layer height add a pause on layer 21.

• Print shelf first, magnet orientation doesn't matter. When leaves are paused, place magnets onto printed shelf, pull magnets off the shelf and insert magnets into leaves with the same orientation, careful not to flip them.

• Do not split to parts or objects

• Shelf can be hung on a nail

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐

 +++ You can grab these files from the current download post +++

✨✨-----> Current download post <-----✨✨