Start Here! Build instructions for OSR2 and SR6 - June 2022
Added 2022-06-10 11:32:56 +0000 UTCThe purpose of this Patreon is to keep evolving and improving multi-axis stroker robots. I generally aim to get out a release each month and the result of that is finding stuff amongst my back catalogue of posts can be really difficult!
If you are new to my work this is the place to start. I have produced a comprehensive pack for both the OSR2 and the SR6. At the time of writing these contain the latest part designs and up-to-date photographs of each build step. I always recommend that new builders start on the OSR2 before moving on to the SR6 because it's an easier build and modular but both guides include a step-by-step assembly guide. Be sure to join the discord server as it's definitely the best place to get help or to swap ideas.
This is my $8 release for this month. You would not believe how much work goes into finishing up all of the little details on long documents like this. As you might expect I am done with document writing for the time being! I am keen to get back to the more creative stuff, so expect a lot more of that from next month.
OSR2 and SR6 could not have come about without the help of people like yourself, so I would like to say a big thankyou for your ongoing support!
Happy building!
Tempest
(The files are protected with the june password because of an ongoing Patreon security flaw. Check your email. As a $8 or $16 patron you should have received the passwords in your welcome email, but feel free to contact me if you have any trouble finding them. The files are also available on my discord server.)
(Update 4-9-24: I have attached the latest version of the ESP32 firmware - Alpha5 - to this post.)
Comments
Are the stls in this post the most updated? Or is there a place to find all of the most updated information for the sr6 with all of the goodies?
In The Works Garage
2025-03-28 16:04:30 +0000 UTCPM me. If you haven't already.
TempestVR
2025-03-02 00:41:31 +0000 UTCno password in my welcome email, password please :)
Wolmarc93
2025-02-16 15:20:56 +0000 UTCI just got done finally getting around to finishing the wiring and major assembly of my OSR6, and getting the dam ESP32 working properly. Gotta say, once I work out the issues of instability I'm having with the parts I used(threaded rods for all 6 arms) and get a mounting solution, this thing is gonna be alot of fun! Especially with all the other stuff that uses T-code, just a peek into that rabbit hole has my mind spinning, lol
Steven Meyer
2025-01-27 03:38:02 +0000 UTCHi Tempest. I had an idea I thought I should mention. You have already probably thought of it, but just in case. Your new iteration on the T-wist with the servo off to the side is a good one. Any chance you could design something similar for the T-valve as well? As I have seen you say before, Keeping the weight on the receiver down is important. And, If it could be compatible with the I-lube as well it would be awesome!? Thanks.
Putte
2024-11-28 17:22:14 +0000 UTC4.5" square. Any standard sized 3d printer will be fine. you don't need to get one of the gigantic ones. Something with 215mm square bed will work. Personally I've used PETG as well as ABS to print these.
hamilton_beach
2024-11-06 04:23:34 +0000 UTCHey Tempest, question: What's the biggest part and the size of it that needs to be printed either SR6 or OSR2? Will buy a 3D printer based on the largest size. Also, what's the material recommended?
Octavio
2024-09-24 02:29:38 +0000 UTCIt should have come in the greeting email. Check your spam. If you can't find it drop me a PM.
TempestVR
2024-06-30 21:46:41 +0000 UTCI just joined and I need the June password so I can get the STL files for the SR6. Thank you!!!
Steven Ludwig
2024-05-12 01:29:36 +0000 UTCCheck you're using the june password. DM me if you're still having trouble.
TempestVR
2024-04-11 09:46:18 +0000 UTCCheck you're using the june password. DM me if you're still having trouble.
TempestVR
2024-04-11 09:46:14 +0000 UTCpassword doesn't work for me
ᄋᄋᄋ ᄋᄋ
2024-04-10 07:05:21 +0000 UTCpassword doesn't work for me
Randell Traylor
2024-04-06 17:35:37 +0000 UTCty!
joe mcdonald
2023-10-05 18:28:51 +0000 UTCJune password for June release. PM me if you’re still having trouble.
TempestVR
2023-10-05 18:01:24 +0000 UTCpassword doesnt seem to work for october 2023?
joe mcdonald
2023-10-05 17:56:16 +0000 UTCComparable performance to the handy currently, though smoother. Better than Launch and Keon. The mechanism is still being refined though so expect improvements in the short to medium term.
TempestVR
2023-02-27 22:02:28 +0000 UTCThis looks great! I am curious how the performance compares to products available in this genre such as the handy or the infamous fleshlight launch?
Peter Acworth
2023-02-27 13:37:12 +0000 UTCIs there a discord group
Darkness
2022-09-26 19:37:27 +0000 UTCCant wait to get it working. So many cool aplications
Darkness
2022-09-26 19:36:13 +0000 UTCnice work
곽군님이다 이라거
2022-06-21 19:55:55 +0000 UTCI might have to start upgrading to a SR6 to celebrate!
Dark Cypher
2022-06-15 11:03:42 +0000 UTCI am stoked to put the SR6 together!
coder.sb
2022-06-15 02:58:15 +0000 UTCThe best place to ask this is over on discord
JamieB
2022-06-13 18:47:09 +0000 UTCWhat are the best servos to use? I've found cheap ones and 35kg feeltech for a good price.
λɟᴉɹɒןnɓuᴉs
2022-06-10 21:22:07 +0000 UTCOnly 2.5 years in the making! 😅
TempestVR
2022-06-10 13:12:38 +0000 UTCThis is an incredibly good post. Thank you
JamieB
2022-06-10 13:08:19 +0000 UTC
