Subscriber Exclusive: MMMini Bunny!!
Added 2024-03-08 22:04:24 +0000 UTC***THIS FILE IS NO LONGER INCLUDED FREE WITH SUBSCRIPTION.
It can be purchased once re-released according to this Schedule.
Hey All!
It's Bunny season! With Easter on it's way, I thought it would be a good time to add a MMMini Bunny to the family!
This mini is 100% print-in-place, and requires no supports. Its a quick and easy print that scales down very well. I've included both regular and keychain versions. There is also a pre-painted 3MF for those who want to print it in multicolor!
Cheers!
Matt
Pictured Prints use the following filaments***
(reference the numbered prints in last image of the gallery)
(1 & 2) Polyterra Cappuccino with Eryone Red Wax accents
(3) Ziro Mist tri-extrusion
(4) Polyterra Cotton White, with PrintBed Purple eyes, and iSANMATE HS Pink accents
(5) Polymaker Starlight Jupiter
(6) Ziro Macaron with iSANMATE High Speed Rainbow accents
*Click Here to go to the Pinned "the Hub - Info and Current Download Links" post
PRINT SETTINGS:
Includes Standard and Keychain versions. I used these Key Rings and Binder Rings
Print-in-Place
3MF: multi-color file included (works in PrusaSlicer or Bambu Studio) Includes both the regular and keychain in the file. Just delete whichever one you don't want to print at the time.
3 Walls
10% infill
This cute little fella scales down really well. It typically works at 40%. Your mileage may vary.
*Click Here to go to the Pinned "the Hub - Info and Current Download Links" post.
***Paid Link. As an Amazon Associate I earn from qualifying purchases.
Comments
Can you make a mini bunny with floppy ears hanging down?
Luke Shaver
2025-01-21 22:00:24 +0000 UTCThought I could be of some help. I also have the Bambu lab printer. The message comes up for me for most files. Honestly, I ignore it and have never had an issue. When I first started this, it stressed me out. I thought my prints were going to be all messed up but never happened. If anything, only issue I had was after a while the hot bed adhesive abilities went down so just add your glue stick to the bed with a even coat and let it dry. Hopefully that was of some help and some help for the future.
Rose
2024-04-22 01:20:03 +0000 UTCThese are adorable!
Marie McCay
2024-04-04 22:06:13 +0000 UTCIt came out good thank you so much
Ksp
2024-03-27 01:32:29 +0000 UTCThank you will try it and see how it does
Ksp
2024-03-26 23:47:41 +0000 UTCThat's just the slicer being overly cautious about the bridging in the back legs. You can ignore it. Slicers are sometimes over-protective, and give warnings for things that are not really an issue.
MatMire_Makes
2024-03-26 23:42:48 +0000 UTCi have a bambulab printer and want to do the mini bunny it says This mini is 100% print-in-place, and requires no supports. but when i tell it to splice it so i can print it. it comes up and tells me that it needs supports to either oriontate or enable supports. any suggestions. im new to this
Ksp
2024-03-26 23:33:15 +0000 UTCWhich 3d printer do u use?
Rocio Mondaray Arias
2024-03-15 19:25:29 +0000 UTCThese bunnies are so cute! I love the keychain also!
Jill Martin
2024-03-13 20:44:44 +0000 UTCAbsolutely love them, however is there any chance of these having a varient with their ears down so they don't easily snap in pockets? Thanks!
Shannon Hill
2024-03-10 10:38:36 +0000 UTCThese are adorable! Your designs just make me smile.
Erin Loosbrock
2024-03-09 21:55:29 +0000 UTCanyone know how small you can go and still fit a key-ring?
Simon Hodgson
2024-03-09 20:12:16 +0000 UTCI love it along with the other baby animals!!!!
Crystal Cahoon
2024-03-09 18:13:59 +0000 UTCSo cute!
Antonia Hernandez (Sheena)
2024-03-09 17:22:26 +0000 UTCPerfection ❤
Dreamweaver
2024-03-09 02:15:56 +0000 UTCThese are adorable!!!!
Leslie DeMedicis
2024-03-09 00:43:39 +0000 UTC1 and 2 are the same Polyterra Cappuccino filament. It’s a gradient between browns and cream/whites (coffee and froth). :)
MatMire_Makes
2024-03-09 00:31:51 +0000 UTCThese are perfect for Easter, anyone know what color bunny 2 is?
Mike Goodwin
2024-03-09 00:26:53 +0000 UTCOh how cute! These will go perfect with the bigger bunny! Love them!
Jason C
2024-03-08 23:31:32 +0000 UTCPrinting now! I have a sale tomorrow!!!! Let’s see how many I can print?
Alissa K O'Toole
2024-03-08 22:50:53 +0000 UTCYes!
Melanie Edwards
2024-03-08 22:48:03 +0000 UTCAwww so adorable! 😻
Moon
2024-03-08 22:41:30 +0000 UTCOmgosh the bunny butts!!! They are the BEST! Soon as my 10th platypus is done printing I’m making these! Thank you! 🫶🏼
Giamarie Saponaro
2024-03-08 22:29:18 +0000 UTCOooo mini jackalopes!!!
krista romero
2024-03-08 22:23:05 +0000 UTCThese are brilliant! I can’t wait to print a million of them 😁
krista romero
2024-03-08 22:22:49 +0000 UTCThese are adorable. Setting up a 2nd printer running these.
carrie roehrig
2024-03-08 22:22:29 +0000 UTCOh My Goodness. These are so adorable.
Cindi Ward
2024-03-08 22:21:20 +0000 UTCThe mmminis are my favorites!!! They’re so cute!! I love them!! Can we get mmmini jackalopes too??
Kristi Pearce
2024-03-08 22:18:03 +0000 UTCOoh you know I’m all over this one. Let the printing begin!!!
Al Supak
2024-03-08 22:14:17 +0000 UTCYou’re on to a winner with these minis! These will be great Easter presents for the kids. Amazing work!
Stuart
2024-03-08 22:13:47 +0000 UTCI know what I'm printing this weekend!!
Abigail Petri
2024-03-08 22:13:00 +0000 UTCLoving the new minis, they are so cute
Leah Hendry
2024-03-08 22:11:08 +0000 UTCI'm getting real tired of telling u how great you are! Once again fab!
Crissy
2024-03-08 22:09:50 +0000 UTCTheir so cute!!!
Tina Brownfield
2024-03-08 22:09:45 +0000 UTCAwwww!!!! I love it! Perfect for Easter eggs!
JPetitt
2024-03-08 22:07:45 +0000 UTCNeed it! 😍
Christina Schwarz
2024-03-08 22:07:02 +0000 UTCAwww.....these are so cute...loving the tiny prints
Dustie Chase
2024-03-08 22:06:49 +0000 UTC
