HoloMat 2! Hardware + Code + 3D prints
Added 2024-11-14 22:42:08 +0000 UTCHere is all the information you need to get started building Holomat 2!
You guys requested I use a specific projector and setup so I defined it and outlined it in the Build doc below!
Holomat2 is a work in progress. As we go everything will be posted here! The code and 3D files are almost done and will be updated here tonight!
Holomat 2 code will be uploaded shortly, if you are new and looking to get started coding, check out my Holomat 1 tutorial along with the code:
https://github.com/Concept-Bytes/Holomat
Update!
https://github.com/Concept-Bytes/HoloMat2
Please let me know if you are having issues running this.
Note:
-Camera is removed for Holomat2 So App2 (Scanning) Will not work
-You will need exactly the projector from the build guide and the touch mat. Or you will need to modify the code to match the alignment.
In development still:
-Automatic alignment and calibration (I am almost done with this)
-Spotify app is a keyboard test. Both are in development
Thanks everyone and enjoy!
-Concept!
Comments
Where is control_board_b ack file ?
emmanuel romain
2025-02-19 19:03:22 +0000 UTCWhat do I need to do to get access to the setup with scan and everything? what is your latest most developed version of this?
Bodhi King
2025-02-12 18:14:22 +0000 UTCWhat developer board do i use. can i use a raspi?
Ripken
2025-02-07 23:22:16 +0000 UTCWhat control boards are compatible with this build?
Luis Nunez
2025-01-10 17:38:10 +0000 UTCThere is an option to buy access to just the lodt for $5, just joined right now though not sure if this is the only post needed for this project.
Harley Marquez
2025-01-10 16:40:17 +0000 UTCWhere is the control board back file
Marc Taylor
2025-01-04 04:10:46 +0000 UTCLike I mentioned in my comment, IR touch frames could be a good solution in terms of price. I'm European too, and in my country, the mat costs around €120. However, an IR touch frame, which essentially does the same thing, is priced at around €40-60. I'm not sure if the code would work with such a touch system, but it could be a nice, budget-friendly alternative.
Steepy
2024-12-29 22:05:28 +0000 UTCIf you're looking for a more affordable option in terms of size and price, you should consider IR (infrared) touch displays. They're slightly less accurate but significantly cheaper, typically ranging between $40 and $100 for touch sizes from 32" to 65". The only major difference is that you have a "large" square frame around the mat instead of a thin foil. However, if you integrate the mat into the desk, it should look more "aesthetic". In comparison, for the price of the mat in my country (120€ for a 32" touch foil), I could get a 75" IR touch frame. I'm planning to look into buying an IR frame in the next few months to test if it works. I'm not 100% sure yet, and I haven't checked the code, but if it's just used like any other touch surface, it should work fine.
Steepy
2024-12-29 21:58:45 +0000 UTCYou don’t. But I got tons of complaints about not having it set for a specific projector. If you can modify a few lines of code you can use anything you want.
Kevin Coda
2024-12-17 13:31:08 +0000 UTCDo you really need to use a new projector? because the build price is going up. Projector isnt $69.99 here in The Netherlands, but $103.53. Touchpad isnt $65 here in The Netherlands, but $85.05. Someone from the Netherlands/ Europe with a alternative? (I have a 4k beamer hanging on the ceiling of my garage for holomat1)
Mark Brantjes
2024-12-17 08:49:08 +0000 UTCNo
Jaron Wilson
2024-12-16 02:47:11 +0000 UTCDid you ever happen to figure it out? I to am having that problem and would appreciate if you knew how to fix it
Freely Porshe
2024-12-15 04:41:33 +0000 UTCAny update on the code, that's why I got the subscription, might cancel then come back in a couple months, as it takes a while to create good code.
Jaron Wilson
2024-12-14 06:21:19 +0000 UTCWhere is the code?
Benett Schwartz
2024-12-13 01:14:10 +0000 UTCYo! The HoloMat 2 is still a work-in progress. The code will hopefully be released within the near futurem, but stay tuned to the Patreon. It should come out sooner or later, and maybe you can expect a Jarvis integration video too ;) Stay tuned! 😄😂
Berle
2024-12-06 08:37:18 +0000 UTCSo where is the code?
Matheus Monteiro
2024-12-01 03:51:11 +0000 UTCHope you find it out, had no luck here
Matheus Monteiro
2024-12-01 03:46:24 +0000 UTCDoes the holomat v2 still scan objects?
Jeremy Andersen
2024-11-25 17:29:22 +0000 UTCSo what's up with that code?
masrad
2024-11-25 01:17:06 +0000 UTCI have the same issues. Im trying to make some time this weekend to figure it out. Once I figure it out I'll see if I can help alternatively if you suss it out Jimmy or if anyone know let me know please
Daniel Twynham
2024-11-22 09:26:08 +0000 UTCAny luck finding a different hardware vendor for the Matt that can get it delivered within 2 months?
Craig DuBose
2024-11-19 03:35:08 +0000 UTCLooking for a little help with the HoloMat; followed along and need some clarity. From Version 1 to what is live now on Github there seems to be some significant changes. I got the "Home Screen" coded and apps 1,3,4, and 6 (the other app were missing .mpy file on github) When I run it the Home Screen pops up off center to the right, no app icons or other apps. When I touch Home it stops. Any suggestions to move this along?
Jimmy
2024-11-19 01:07:25 +0000 UTC
