my3dprintforge

September "Trolls v2" early WIP

Greetings!

Some work-in-progress screenshots of the upcoming "Trolls v2" release.

Septembers release will include 20+ STLs (click to see references):

1. wc3 Vol'Jin -at least 3 poses + Bust -WIP
2. Bwonsandi - at least 3 poses - WIP
3. wc3 Bathrider + Bath (1-2 poses) - WIP
4. Vol'Jin Diorama - on raptor (currently in work)
5. Starting gear trolls male at least 4 poses - currently in work
6. Starting gear trolls female- at least 4 poses - currently in work
7. wc3 Troll Headhunter male - at least 3 poses - WIP
8. Troll Headhunter female - at least 3 poses - WIP

You can still suggest some minor changes to models and good looking poses (with references).

You can expect renders around the 5th of September and full release around the 12th of September.

Please keep in mind that those mainly are WIP and changes can be made.

New 6-mont Loyalty reward

Greetings guys! I am excited to present to you our new 6-month loyalty reward!

Magtheridon (on 75mm base), the former Lord of Outland, is a pit lord who conquered the ruins of the orcish homeworld following its destruction. His reign was ended by the arrival of Illidan Stormrage, who took Magtheridon's throne at the Black Temple for himself. Deciding that Magtheridon would have a further part to play, Illidan had Magtheridon's body dragged to the Hellfire Citadel where he imprisoned the pit lord, leaving him at the mercy of the fel orcs.

He will be available starting from the next month ONLY to our loyal patrons -that have supported us for 6 consequent months (you can't get this model anywhere else).

Model will stay as a 6-month loyalty reward from 09.2023 till 12.2024 and only after this period will be uploaded to MMF store (for others to buy).

In September, I am planning to introduce our 9-month loyalty reward, that will be released in October (If all goes as planned).

Later I will update post with test-printed photos.

Info on New 3-month Loyalty reward 

P.S. You still can get our old Loyalty rewards till the end of this year.

Cheers!

August Printed Models Showcase

Hello guys!

This August release "Knights of Lordaeron" printed on Anycubic Photon Mono 0.05mm layer + grey primer.

As always happy printing and thank you for your support!

"Knights of Lordaeron" August release (Download link)

Hello guys! I am finished with test-printing!

Models are ready for download!
All 24+ models were successfully test-printed  (A bit later I will post printed photos- for now I got little assemble video see P.S.3. below ).

"Knights of Lordaeron" Release download link: CLICK if you were a patron during August you will automatically receive a download link to Myminifactory on the 1-3 of September (please check your Patreon email).

If you don't get it please contact me.

All previous releases can be obtained on Myminifactory with a 50% discount to all active patrons: AugC0De08 - expires on the 16th of September.
You can use the discount code here (click): myminifactory
+Welcome pack
+ Info on Loyalty rewards (valid till 2024)

New Loyalty rewards will be introduced till 2024
1. New 3-Month Loyalty reward
2. New 6-Month Loyalty reward (coming next month)
3. New 9-Month Loyalty reward(coming soon)
3. New 12-Month Loyalty reward(coming soon)

P.S.1. - This time human models are a bit bigger than our previous ones, I wanted them to look like elite Lordaeron knights that are like 6,5 foot tall  (if you want them to match previous human models I suggest scaling them down for about 5%), but oh boy they look soo great 3D printed.
P.S.2. - We have 3 models riding a horse (two Knights and Death-Knight) - they fit pretty tight, so please position them careful and press with strength (should click in place if placed right-pay attention on their back-saddle position)
P.S.3. - Diorama assemble video (it is a bit tricky to place hand on shoulder and then position sword to its place so I made a little video)
P.S.4.- new 6-Month Loyalty reward will be introduced later this month, anyone that was a supporter for at least 6 consecutive months will get it free at the beginning of September.

Note: If you are posting your prints painted or unpainted on Facebook or Instagram please be so kind as to tag us @my3dprintforge which will help us grow!

Update: on request I made discord channel (link Discord) where you can discuss anything related to our miniature painting/printing/suggestions etc.

Please join our FACEBOOK page dedicated to showing off our printed/painted models.

release

September's theme VOTING results

Voting results - "Trolls v2" won with 35% of total votes, anyone that voted for Dracthyr (second place with 34%), please don't be upset as we will sculpt them anyway (some other month) and I will make sure Troll v2 release will be an amazing one (though, I am not sure it can overshoot this month's release with Arthas and his father  ;)).

Thanks to everyone who participated in voting and left suggestions in the comments below.

September relases "Trolls v2" will include:

1. wc3 Vol'Jin -at least 3 poses + Bust
2. Bwonsandi - at least 3 poses
3. wc3 Bathrider + Bath (at least 2 poses)
4. Vol'Jin Diorama - please suggest with reference
5. Starting gear trolls male at least 4 poses
6. Starting gear trolls female- at least 4 poses
7. wc3 Troll Headhunter male - at least 3 poses
8. Troll Headhunter female - at least 3 poses

Please leave a comment, your suggestions on poses, etc. I will gladly read them and answer everyone. Preferably with the link on a reference.

Release will consist of around 20+ models I will update with WIP shots around 28th of August.

P.S. Later this month I will introduce new 6-Month Loyalty reward, anyone that were supporters for at least 6 consecutive months will get it free at the beginning of September.

August release RENDERS "Knights of Lordaeron"

Greetings!

I am happy to present RENDERS of 24+ new models from the "Knights of Lordaeron" release. I did my best and hope you will like this release (all pre-supported 32mm scale).

230801-BUST-Paladin (Arthas)
230802-Paladin_Standing (Arthas) - weapon swap option (glue magnet)
230803-Paladin_attack (Arthas)
230804-Paladin_Mace_on_shoulder (Arthas)
230805-King_Teren_Standing
230806-King_Teren_on_throne(throne prints separately)
230807-Death_Knight_attack (Arthas Evil)
230808-Death_Knight_on_horse (Arthas evil + undead horse prints separately)
230809-Return of the prince (King dying diorama - 3 separated models)
230810-Knight_Standing
230811-Knight-on-horse_Relaxed (horse prints separately)
230812-Knight-on-horse_attack (horse prints separately)
230813-Female_footman-with_2hand_Sword
230814-Feamle_Footman_Shiwld_Sword_Standing
230815-Female_Footman_Shield_Sword_Attack
230816-Footman_Attack_with-2hand-sword
230817-Footman_Shield_attack
230818-Footman_standing
230819-Fallen_Footman
230820-Knight_Captain_giving_orders
230821-Knight-Captain_Standing
230822-Knight_Captain_Attack_with_Swords
230823-Althar_of_Kings (prints with 3 separated parts)
230824-Lion_Flag (bonus model of flag without Lordaeron emblem)

Please let me know in the comments, what you think about this release and I would also like to know the miniatures you like the most from this pack :)

My top 3:

1= 230804-Paladin_Mace_on_shoulder
2= 230816-Footman_Attack_with-2hand-sword
3= 230811-Knight-on-horse_Relaxed

ABOUT THE DOWNLOAD LINKS: Tomorrow I am starting with pre-supporting and in day or two I will start with test-printing. If all goes smoothly you can expect the download link around August 10th.

VOTING -September+New 50% off code

Hey guys!

Let's vote for the September theme, which is Horde theme month.

For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months,  so September will be dedicated to the Horde, and October - to the Dungeon).

Please vote until August 10th on the following topics
(refer to the image for an example).

As always please leave your comments and suggestions, I truly anticipate reading them!

New 50% discount code on MMF - works on all our previous releases (expires on 16 September)- AugC0De08
Myminifactory store link -> Click

August "Loraderon Knight" early WIP

Greetings!

Some work-in-progress screenshots of the upcoming "Lordaeron Knights" release.

August release will include 16+ STLs (click to see references):

1. Arthas Human Paladin (before turning Evil) -at least 3 poses + Bust
2. King Terenas Menethil II (last king of Lordaeron) - at least 2 poses
3. Arthas Death Knight (without helm-turned to Evil)
4. Diorama - Arthas killing his father on throne
5. Lordaeron Knight on a horse - at least 2 poses
6. Lordaeron Footman - at least 2 poses
7. Lordaeron Footman Female - at least 2 poses
8. Lordaeron Knight Captain - at least 2 poses
9. Althar of Kings

*Lord Garithos wont join us this time, as he looks very similar to Knight Captain, instead There will be Lordaeron Footman Female version and Arthas Death Knight on a undead horse.

You can still suggest some minor changes to models and good looking poses (with references).

You can expect renders around the 5th of August and full release around the 10th of August.

Please keep in mind that those mainly are WIP.

New 3 Month Loyalty reward!

Greetings guys! I am excited to present to you our new 3-month loyalty reward!

Lord Kazzak (on 50mm base) - a battle-hardened doomlord and commander of the Burning Legion forces. After the Third War, Lord Kazzak remained on Azeroth, in the Blasted Lands, and later he reopened the Dark Portal, allowing the Legion to invade once more and marking the beginning of the invasion of the Outland.
He will be available starting from the next month ONLY to our loyal patrons -that have supported us for 3 consequent months (you can't get this model anywhere else).

Model will stay as a 3-month loyalty reward from 08.2023 till 12.2024 and only after this period will be uploaded to MMF store (for others to buy).

In august, I am planning to introduce our 6-month loyalty reward, that will be released in September (If all goes as planned).

Later, I will update this post with test-printed photos.

P.S. You still can get our old Loyalty rewards till the end of this year.

Cheers!

July Printed Models Showcase

Hello guys!

This July release "Karazhan Part1" printed on Anycubic Photon Mono 0.05mm layer.

As always happy printing and thank you for your support!

"Karazhan Part1" July release (Download link)

Hello guys! I am finished with test-printing!

Models are ready for download!
All 18+ models were successfully test-printed  (A bit later I will post printed photos).

"Karazhan Part1" Release download link: Click if you were a patron during July you will automatically receive a download link to Myminifactory on the 1-3 of August (please check your Patreon email).

If you don't get it please contact me.

All previous releases can be obtained on Myminifactory with a 50% discount to all active patrons: F0rgeJuly23 - expires on the 16th of August.
You can use the discount code here (click): myminifactory
+Welcome pack
+ Info on Loyalty rewards

P.S.1. - As this is a dungeon release all models have been scaled up a bit (if compare to humans) to make them more "boss" like.
P.S.2.- new 3-Month Loyalty reward will be introduced later this month, anyone that was a supporter for at least 3 consecutive months will get it free at the beginning of the August.

Note: If you are posting your prints painted or unpainted on Facebook or Instagram please be so kind as to tag us @my3dprintforge which will help us grow!

Update: on request I made discord channel (link Discord) where you can discuss anything related to our miniature painting/printing/suggestions etc.

Please join our FACEBOOK page dedicated to showing off our printed/painted models.

August theme Voting Results

Voting results - "Lordaeron" won by taking 49% of total votes!
Thanks to everyone who participated in voting and left their suggestions in the comments below.

Lordaeron release will include:

1. Arthas Human Paladin (before turning Evil) -at least 3 poses + Bust
2. King Terenas Menethil II (last king of Lordaeron) - at least 2 poses
3. Arthas Death Knight (without helm-turned to Evil)
4. Diorama - Arthas killing his father on throne
5. Lordaeron Knight on a horse - at least 2 poses
6. Lordaeron Footman - at least 2 poses
7. Lordaeron Knight Captain - at least 2 poses
8. Lord Garithos or this reference :D - at least 2 poses
9. Althar of Kings

P.S. All shield ornaments will be with Lordaeron mark on them.

Please leave a comment, your suggestions on poses, etc. I will gladly read them and answer everyone. Preferably with the link on a reference.

Release will consist of around 16+ models I will update with WIP shots around 28th July.

P.S. Later this month I will introduce new 3-Month Loyalty reward, anyone that were supporters for at least 3 consecutive months will get it free at the beginning of the August. 

July Renders "Karazhan Part1"

Greetings!

I am happy to present RENDERS of 18+ new models from the "Karazhan part1" release. I did my best and hope you will like this release (all pre-supported 32mm scale).

230701-Hell_Hound
230702-Hell_Hound_Attack
230703-Huntsman_attack
230704-Huntsman_on_HORSE (Horse prints separately)
230705-Undead_Rogue_Moroe
230706-Undead_Rogue_Moroe_Attack
230707-Maiden_stone_giant
230708-Maiden_stone_giant_Attack
230709-Big_Bad_wolf
230710-Big_Bad_wolf_attack
230711-Romeo_Attack
230712-Romeo_Dueling
230713-Juliette-attack
230714-Juliette-casting
230715-Robot_Currator
230715-1-Astral_flare (Robot Currator Spell)
230716-Wizzard_Mediev (Medivh)
230717-Wizzard_Mediev_casting_spell (Medivh)
230718-BUST-Wizzard_Mediev (Medivh)

Please let me know in the comments, what you think about this release and I would also like to know the miniatures you like the most from this pack :)

My top 3:

1= 230716-Wizzard_Mediev
2= 230704-Huntsman_on_HORSE
3= 230708-Maiden_stone_giant_Attack

ABOUT THE DOWNLOAD LINKS: Tomorrow I am starting with pre-supporting and in day or two I will start with test-printing. If all goes smoothly you can expect the download link around July 10th.

VOTING - August + New 50% discount code

Hey guys!

Let's vote for the August theme, which is Alliance theme month.

For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months,  so September will be dedicated to the Horde, and October - to the Dungeon).

Please vote until July 10th on the following topics
(refer to the image for an example).

As always please leave your comments and suggestions, I truly anticipate reading them!

New 50% discount code on MMF: works on all our previous releases (expires on 16 August)-  "F0rgeJuly23"
Myminifactory store link -> Click

Cheers!

July "Karazhan" early WIP

Greetings!

Some work-in-progress screenshots of the upcoming "Karazhan Part1" release.

July release will include 20+ STLs (click to see references):

1. Rokad the Ravager
2. Attumen the Huntsman (with a horse)
3. Moroes
4. Maiden of Virtue
5. The Big Bad Wolf (from a opera event)
6. Romulo (from a opera event)
7. Julianne (from a opera event)
8. The Curator
9. Mediev

As always please suggest some good looking poses (with references).

You can expect renders around the 5th of July and full release around the 12th of July.

Please keep in mind that those are WIP - your suggestions (poses, weapons, or some small changes in model) in the comments below are highly appreciated!

June release Printed models

Hello guys!

This June release "Undeads v2" is printed on Anycubic Photon Mono 0.05mm layer.

As always happy printing and thank you for your support!

"Undeads v2" June release (Download link)

Hello guys! I am finished with test-printing!

Models are ready for download!
All 25 models were successfully test-printed  (A bit later I will post printed photos).

"Undeads v2" Release download link: click if you were a patron during June you will automatically receive a download link to Myminifactory on the 1-3 of July (please check your Patreon email).

If you don't get it please contact me.

All previous releases can be obtained on Myminifactory with a 50% discount to all active patrons: JunForge500FF - expires on the 16th of July.
You can use the discount code here (click): myminifactory
+Welcome pack
+ Info on Loyalty rewards
P.S.- New loyalty rewards will be introduced later this summer approx. July.

Note: If you are posting your prints painted or unpainted on Facebook or Instagram please be so kind as to tag us @my3dprintforge which will help us grow!

Update: on request I made discord channel (link Discord) where you can discuss anything related to our miniature painting/printing/suggestions etc.

Please join our FACEBOOK page dedicated to showing off our printed/painted models.

July theme Voting results

Voting results - "Karazhan" won by taking 35% of total votes!
Thanks to everyone who participated in voting and left their suggestions in the comments below.

First part of Karazhan will include:

1. Rokad the Ravager
2. Attumen the Huntsman (with a horse)
3. Moroes
4. Maiden of Virtue
5. The Big Bad Wolf (from a opera event)
6. Romulo (from a opera event)
7. Julianne (from a opera event)
8. The Curator
9. Mediev (from the chess event) or should I use this as reference?

Please leave a comment, your suggestions on poses, etc. I will gladly read them and answer everyone. Preferably with the link on a reference.

Release will consist of around 20+ models I will update with WIP shots around 28th June.

June RENDERS "Undeads v2"

Greetings guys!

I am happy to present RENDERS of 25+ new models from the "Undeads v2" release. I did my best and hope you will like this release (all pre-supported 32mm scale).

230601-Undead_female_mage_cast
230602-Undead_female_Mage
230603-Undead_Fem_Priest_cast
230604-Undead_FeM_Priest
230605-Undead_Mage_starting_cast
230606-Undead_Mage
230607-Undead_Priest_casting
230608-Undead_Priest_Mace
230609-BUST_Sylvanas
230610-Sylvanas_standing
230611-Sylvanas_Shooting
230612-Sylvanas_shouting
230613-Banshee_attack
230614-Banshee
230615-Nathanos_With_axes
230616-Nathanos_Shooting
230617-Nathanos_standing
230618-Undead_Acolyte_casting
230619-Undead_Acolyte_Praying
230620-Undead_acolyte_with_dagger
230621-Meat_wagon
230622-Undead_Apothecary
230623-Undead_Apothecary_mixing_Vials
230624-ValKyr_flying
230625-Valkyr_with_Spear

Please let me know in the comments, what you think about this release and I would also like to know the miniatures you like the most from this pack :)

My top 3:

1= 230610-Sylvanas_standing
2= 230621-Meat_wagon
3= 230618-Undead_Acolyte_casting

ABOUT THE DOWNLOAD LINKS: Tomorrow I am starting with pre-supporting and in day or two I will start with test-printing. If all goes smoothly you can expect the download link around June 12th.

Voting for July release Theme

Greetings!

Let's vote for the July theme, which is Dungeon/raid theme month.

For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months,  so July will be dedicated to the Dungeon, and August - to the Alliance, September to the Horde).

Please vote until June 10th on the following topics, refer to the image for an example or follow links below to see more info.
1. Karazhan
2. Eye of Azshara
3. Sunwell Plateau
4. Onyxia Lair
5. Siege of Orgrimar
6. Hellfire Citadel 

Note1:Thank you for the suggestions, unfortunately, I had to pick only a few from various good suggestions.

I noted Serpentshrine caver, Ulduar, Hellfire Ramparts, Black Rock Depths  so they will appear in one of the future dungeon-month polls - less-voted options will leave the poll for next time but will appear sometime later.

June "Undeads v2" early WIP

Greetings!

Some work-in-progress screenshots of the upcoming Undeads v2 release.

June release will include 25+ STLs (click to see references):

1. Starting gear Undeads (male/female) mage/priest at least 9 models (female model no images)
2. w3 style Sylvanas at least 2 poses + Bust
3. w3 style Banshee at least 3 poses
4. Nathanos at least 2 poses
5. Undead Acolyte at least 3 poses
6. Meat wagon
7. NPC Undercity Apothecary at least 2 poses - please suggest pose for him!
8. Val'kyr at least 3 poses - no images to show (just started working on it now)

As always please suggest some good looking poses (with references).

You can expect renders around the 5th of June and full release around the 12th of June.

Please keep in mind that those are WIP - your suggestions (poses, weapons) in the comments below are highly appreciated!

May release printed models showcase

Hello guys!

This May release "Dwarfs v2" is printed on Anycubic Photon Mono 0.05mm layer.

As always happy printing and thank you for your support!

"Dwarfs v2" May release (Download link)

Hello guys! Finally I am finished with test-printing!

Models are ready for download!
All 26 models were successfully test-printed  (A bit later I will post printed photos).

"Dwarfs v2" Release download link: click- if you were a patron during May you will automatically receive a download link to Myminifactory on the 1-3 of June (please check your Patreon email).

If you don't get it please contact me.

All previous releases can be obtained on Myminifactory with a 50% discount to all active patrons: F0rMaY123 - expires on the 16th of June.
You can use the discount code here (click): myminifactory
+Welcome pack
+ Info on Loyalty rewards
P.S.- New loyalty rewards will be introduced later this summer approx. July.

Note: If you are posting your prints painted or unpainted on Facebook or Instagram please be so kind as to tag us @my3dprintforge which will help us grow!

Update: on request I made discord channel (link Discord) where you can discuss anything related to our miniature painting/printing/suggestions etc.

Please join our FACEBOOK page dedicated to showing off our printed/painted models.

June theme voting results

Greetings!

Voting results - "Undeads v2" won by taking 55% of total votes!
Thanks to everyone who participated in June's voting and left their suggestions in the comments below.

June release will include 20+ STLs (click to see references):

1. Starting gear Undeads (male/female) at least 9 models
2. w3 style Sylvanas at least 2 poses + Bust
3. w3 style Banshee at least 3 poses
4. Nathanos at least 2 poses
5. Undead Acolyte at least 3 poses
6. Meat wagon
7. NPC Undercity Apothecary at least 2 poses
8. Val'kyr at least 3 poses

Please suggest some good looking poses (with references).

P.S. Dwarfs release is coming tomorrow.

May RENDERS "Dwarfs v2"

Greetings guys!

I am happy to present RENDERS of 26+ new models from the "Dwarf v2" release. I did my best and hope you will like this release (all pre-supported 32mm scale).

230501-Flying_machine (wings and propeller prints separately and can change position of wings and switch propellers)
230502-03-Dwarf Female_war
230504-05-Dwarf Female_Paladin
230506-Dwarf Female_Heritage_tank
230507-Dwarf Female_Heritage_2handAxe
230508-Dwarf Female_Heritage_Attack
230509-Dwarf_Heritage_attack
230510-Dwarf_Heritage_tank
230511-Dwarf_Heritage_2handAxe
230512-Dwarf_Leader_BUST
230513-Dwarf_Leader_Stone
230514-Dwarf_Leader_Standing_on_cliff
230515-Dwarf_Leader_Attack
230516-17-Dwarf_Female_Ironforge guards
230518-19-Dwarf_Ironforge guards
230520-21_Dwarf_captain
230522-23-Dwarf_paladin
230524-25-Dwarf_warrior
230526-Campfire

Please let me know in the comments, what you think about this release and I would also like to know the miniatures you like the most from this pack :)

My top 3:

1= Dwarf_Leader_Standing_on_cliff
2= 230508-Dwarf Female_Heritage_Attack
3= 230501-Flying_machine

ABOUT THE DOWNLOAD LINKS: I am starting with pre-supporting and in day or two I will start with test-printing. If all goes smoothly you can expect the download link around May 12th.

VOTING -MAY+New 50% off code

Hey guys!

Let's vote for the June theme, which is Horde theme month.

For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months,  so June will be dedicated to the Horde, and July - to the Dungeon).

Please vote until May 12th on the following topics
(refer to the image for an example).

As always please leave your comments and suggestions, I truly anticipate reading them!

New 50% discount code on MMF - works on all our previous releases (expires on 16 June)- F0rMaY123
Myminifactory store link -> Click

P.S. Some WIP news-
This summer I am planning to introduce new Epic Loyalty rewards that will include buildings, more info later this summer ;). 

May "Dwarves v2" early WIP

Greetings!

Some work-in-progress screenshots of the upcoming Dwarves v2 release.

April release will include 25+ STLs (click to see references):

1. Flying machine (wings can be set in two positions-prints separately) -it will stand on a rod (that you can print in clear resin) so it will look like it is flying
2. Starting gear Dwarf male/female (no pictures for now)
3. Heritage armor male/female
4. Magni Bronezebeard atleast 2 poses + bust + his "stone" version
5. Ironforge Guards male/female
6. Ironforge Captain
7. Campfire (no pictures for now)

You can expect renders around the 5th of May and full release around the 14th of May.

Please keep in mind that those are WIP - your suggestions (poses, weapons) in the comments below are highly appreciated!

April release printed models showcase

Hello guys!

This April release "Scarlet Monastery" is printed on Anycubic Photon Mono 0.05mm layer.

As always happy printing and thank you for your support!

Scarlet Monastery - April release (DOWNLOAD)

Hello guys! Finally I am finished with test-printing!

Models are ready for download!
All 23+ models were successfully test-printed  (A bit later I will post printed photos).

"Scarlet Monastery" Release download link: click - if you were a patron during April you will automatically receive a download link to Myminifactory on the 1-3 of May (please check your Patreon email).

If you don't get it please contact me.

All previous releases can be obtained on Myminifactory with a 50% discount to all active patrons: DiscoAPril23 - expires on the 16th of May.
You can use the discount code here (click): myminifactory
+Welcome pack
+ Info on Loyalty rewards

Note: If you are posting your prints painted or unpainted on Facebook or Instagram please be so kind as to tag us @my3dprintforge which will help us grow!

Update: on request I made discord channel (link Discord) where you can discuss anything related to our miniature painting/printing/suggestions etc.

Please join our FACEBOOK page dedicated to showing off our printed/painted models.


Cheers!

May theme VOTING results

Greetings!

Voting results - "Dwarves v2" won by taking 39% of the votes!
Thanks to everyone who participated in March's voting and left their suggestions in the comments below, I see March's release as a great one!

May release will include 20+ STLs (click to see references):

1. Starting gear (male/female) at least 8 models
2. w3 Flying Machine (gyrocopter)
3. Heritage armor (male/female) (at least 6 models)
4. Magni Bronzebeard at least 2 poses + Bust
(please suggest the reference with link and upvote the best)
5. Ironforge guards (vendor/cook) at least 3 poses
6. w2 Ironforge Captain at least 2 poses
7. Campfire (this is just a bonus that I wanted to include)

As always please leave your comments and suggestions (please suggest poses/weapons etc. (with link to reference image)).