squirrelf3d

ApolloLander 2025

Some of you may have noticed a new 2024-12-23 18:55:35 +0000 UTC View Post

ApolloLander - 2025

The common accessory zip is the same as the 2024 model If you have a working installed apollo there is no reason to re-print it, but if you have to re-print it, then highly recommend you get these ne...

ApolloLander now supports the Spider Speedy hotend

Had never heard of it, but had two mentions in the span of a couple weeks.

This is untested, please let me know if you have any issues

According to the CAD I found this would use standa...

Apollo Prototype for Chube Air hotend

This is just insane, not yet sure where the weak point are, and just trust in the hotend heat dissipation properties...
This hotend is from 2024-11-25 02:32:43 +0000 UTC View Post

Bed lock wheel clickers (60 clicks) - ender3 series and e3max models and Gulfcoast Robotics e3 plate

I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough...

BambuLab Apollo model updated for Phaetus Conch hotend

Apollo shop page

The filament path alignment wasn't perfect on my old mount, but wor...

Linear rods on ender3max and ender3pro 3v2

2024-11-06 02:40:44 +0000 UTC View Post

Linear rods on Y - Ender3max and ender3 series with 4040 Y extrusions

This was only tested on an Ender3Max Neo (with about 305mm of printable surface on Y out of the 320mm bed) ender3max Neo can sometime be found rather cheap refurbished ( https://www.ebay.com/itm/35516...

Phaetus APUS 2 extruder adapter to Sherpa Mini mounting pattern

You can now use the soon to be released Phaetus APUS 2 extruder with the Apollo, and use the Sherpa mini backplate.

40mm - Fan grill / guard / cover

Unlike most of the stuff I design this requires print support, to keep some distance in front of the fan blades and avoid increasing turbulence noises.

I tried 0.1mm layer height in PETG wit...

ApolloLander - now supports the Creality K1/K1C hotend with unicorn nozzle hotend

Linear rail only, dues to the mounting pattern of the hotend, a stock plate with wheel version wasn't possible on the Apollo.

2024-10-14 02:28:39 +0000 UTC View Post

Top mounted linear rail printed mount

Had a metal mount option for such setup (whambam backplate).
You now have an initial fully printed version of a top linear rail mount.
Hasn't been tested yet, so the end stop may need some a...

Sovol SV06 revisited - new rod mount block for Apollo extralock

Compatible with apollo extra lock model to be fully secured
and widened to match the apollo.

A bit of print space is lost, about 208mm of printable area in X according to CAD (I don't hav...

Ender3 series - Smart Orbiter v3 - with Cartographer or Beacon - X linear rail

Download In the shop page

( Step included)

Has bot...

Smart Orbiter v3 - Beacon or Cartographer - Ender3 series printers

not meant for purchase here but part of the patronage ---- Sept 25th update: added REVO version ----- Step included Smart Orbiter v3 Beacon probe (standard) (only tested Rev H, but I think Rev D s...

TriangleLab TCHC TR6 - new hotend support added to the ApolloLander

TCHC TR6

Download on the Apollo store page

2024-09-13 15:11:43 +0000 UTC View Post

eddy front mount (updated sept 15)

goes on the lower screws of the front fan
you will of course need longer screws, very likely M3x30

M3x20 to secure the eddy

it was a first prototype that was confirmed working, but...

Revised Belt Clamp for Y axis rail upgrade.

The original belt clamp I made (when doing a Y linear rail upgrade) were fine for acceleration under 12K, but had them fail prematurely when testing 16~18K

So these have much better clamping...

Belted Z with Z linear rails - MGN12H 300mm

2024-09-08 04:52:51 +0000 UTC View Post

ApolloLander - added support for Red Lizard K1 Pro hotend and HGT extruder

Not a hotend I have tried so can't say anything about it, but was requested to be supported on the ApolloLander
Can be found on the2024-09-03 03:10:21 +0000 UTC View Post

CPAPpollo (you know CPAP~Apollo..... ) or headphones for Apollo

If you don't know what a CPAP setup is like, just think of it as remote powerful fan, with air traveling through the CPAP tube. Usually two goals in mind with such setup, more air (definitely the c...

nozzle brush - release candidate (rev3.3 - jul30th)

On discord three of us had a brainstorming session and came up with this

This rev3.3 beta release turned into a release candidate.

Won't work with an Apollo klack, but should work on e...

Beacon Rev D / Cartographer side mount for Apollo on wheels

For this you need the right angle version, which at least for the cartographer is the "flat pack" and i...

Belted Ender - lower motor setup (wheel or z rails)

included with patronage. Part list click here ----------- Springs are back on the menu! 15mm red or yellow springs have been tested and work great, (Bed spring are too weak do not use them) Red spr...

Belted ender - dual Z bottom mounted motor

-------------------------------------------------------------------------

Success!! 15mm Yellow spring worked g...

2024-06-22 04:56:41 +0000 UTC View Post

80teeth pulley - printed

5mm bore and 8mm bore
Used in conjunction with a metal GT2 20T pulley, with the front ring removed (pops off easy)

secured with 4 m3x8 screws

About to become useful soon (5mm bore ve...

Tweaked camera mount for the Apollo

Camera is lowered by 1mm, and LED lowered by 2mm or so.
Print both parts, the old camera case was slightly tweaked and likely isn't compatible with this one.

the main mount can be in any ...

Apollo on rail - installation

Download : HERE (store page)

On ender3 series you'll need a MGN12H&nb...

Apollo on wheels - installation

Download : HERE (store page)

If you have a printer with a different backplate, like e...

Y axis full revision - tensioner - motor - rail - 2024

------------------------
DOWNLOAD HERE (shop area)
--------...