sp3dresources

Bundle - Fragile Leg Lamp for G8F

Someone on DeviantArt asked if I would consider making a morph that turns G8F into the leg lamp from a certain Christmas-themed movie, but I decided to do a little more instead.

Through the use of geografts and geoshells, this asset will turn your G8F into a thing of fragile beauty while still allowing you to use your own G8F morphs to shape the lamp to your heart's content!

A simple asset but a few basic notes:

It's recommended you use this asset on a default G8F to avoid geoshell and clothing inconsistencies that may arise. You will still need to delete/hide the eyelashes and tears of G8F/G8.1F after loading the presets.

This asset was made for G8F, but it will work on G8.1F. You may need to manually copy and paste G8.1F's "Body" surface settings over to the "Body" surface of the geograft itself.

If you are using this asset with other geografts (keep in mind that just the leg is visible), you may need to turn off opacity on those geograft surfaces on the new geoshell that loads onto G8F for the stocking effect.

The presets auto-load the lamp shade and lamp base in addition to the geograft, geoshell, and corresponding shoe. Manual positioning on the base and shade may be required for best results.

The lamp shade itself comes with several morphs to customize the shape of the shade.

Obviously, do not use both legs at the same time.

Feedback on Tier Changes

UPDATE: Some folks are asking for a clarifcation/breakdown of what the new tiers would look like.

$1 - Removed entirely.
$3 - Everything that was $1 (mainly adult stuff) and products from my Renderhub that are under $10.
$10 - Products on my Renderhub that are over $10.

If I had to place a rough estimate on my product pricing on Renderhub, the vast majority of my assets are under $10, which means they would stay in the $3 tier.

Note that I consider "$9.99" to be UNDER $10.

By only having assets that are over $10 on Renderhub in the $10 tier, even if I just release one over $10 asset a month you'd still be getting a better  deal than if you had bought it directly from my Renderhub in the first place.

The real benefit would be cases such as my Gladiatorae pack, which was $35.99.

Using Gladiatorae as an example (which is currently in the $3 tier), that's over a 90% discount. If it was in the $10 tier, that would still be an almost 75% discount for you guys.

There's also the fact that if I'm not releasing enough products to justify an upgrade to $10, you could always just fall right back to the $3 tier and still get everything that's under $10 on Renderhub, then simply edit your pledge when a bigger-ticket item comes along on Renderhub and you want an easy discount.

Simply put no matter which tier you decide to pledge to and as long as you stay on top of your pledges and modify accordingly based on your own situation and preferences, you're always going to be getting a better price than what you see on Renderhub.

And before anyone worries, no I do NOT plan on just raising my prices on Renderhub to force $10 pledges.

There are simply some assets that I put a lot more effort into making that I think deserve a little bit higher of a price tag, such as environments, clothing packs, and some of my wilder conversions like the Predator one I did awhile back. I don't want to screw you guys over, but I do want to try and meet somewhere in the middle if possible.

---

Hey, guys!

First off I want to thank all of you for your support when it comes to the random assets I produce. I really appreciate it!

That said, I'm considering some changes to the tiers but I want feedback before I go and do something universally-hated by everyone.

Firstly, I'm considering nuking the $1 tier and instead putting the $1 stuff into the $3 tier instead. At the time of writing this, I have 100 members in the $1 tier.

Second, I'm considering adding another tier (probably $10) for my more expensive Hub products.

Essentially, the $3 tier would still be getting some of the products I release on Renderhub as well as the smaller "simpler" assets that still need to be put behind a paywall due to Patreon TOS.

The $10 tier however would be dedicated to the stuff that is over $10 on my Renderhub. Obviously in cases where I'm selling something for $15-20 this would result in a nice discount for you folks, plus as always there's no obligation to you guys to stay pledged if I'm not producing to your satisfaction.

So...thoughts? Comments?

I'm gonna run a poll to get a quick and dirty opinion specifically on this question:

"How comfortable are you with the idea of a $3 tier to handle both my cheaper Hub assets/simpler adult assets and the creation of a $10 tier for my more expensive Hub assets?"

Bundle - Angelic Bikini for G8F

UPDATE: I have updated the readme included in the zip to address how to make the geostockings display properly on G8.1F and/or on a figure using geografts. Re-download the zip and read the new readme if you're having issues!

Folks on my Discord server kept sharing a gif of a certain Australian actress in a certain getup, so I decided to model the outfit!

"Angelic Bikini" comes with:

Rigged earrings

Top

Bottom

Geoshell stockings

Heels

5 stripe color options

6 opacity options

7 trim color options

5 nail color options

3 earring colors

Compression morphs for the breasts, hips, and thighs

The top also includes both a morph and an extra bone to help adjust breast gap.

So get your G8F or G8.1F squeezed into this getup and strike a pose!

Body oil is optional but certainly recommended.

NOTE: BODY MORPH USED IN THESE PROMOS IS NOT INCLUDED IN THIS PRODUCT - ONLY THE COMPRESSION MORPHS ARE INCLUDED.

Prop - Binding Lantern

As you guys know, I make a LOT of assets...but I'm really bad about staying on top of releasing them for others to use (as you can see from big gaps in posting history here).

I do apologize about that, and I'm gonna try to add assets here as I make them so you guys get fun stuff more regularly!

Here's a lantern I made for a platinum commission I'm working on, so now I'm passing it onto you folks!

The ring and lid are rigged for basic motion.

No light source included for this one (I'm using it to "bind" a fairy), but should work easily-enough with candles or lights you already own!

Prop - Shototototogun

POP QUIZ, WHAT'S BETTER THAN A DOUBLE-BARRELED SHOTGUN

IF YOU ANSWERED ANYTHING LESS THAN 18 BARRELS, YOU'RE AN

ＩＤＩＯＴ

WITH NINE TIMES THE FIREPOWER, YOU KNOW THAT BY THE TIME YOU'RE DONE STRUMMING THE TRIGGERS LIKE THAT WEIRD DUDE IN DELIVERANCE STRUMMING HIS BANJO THAT WHATEVER'S IN FRONT OF YOU, TO THE SIDE OF YOU, AND EVEN BEHIND YOU WILL BE FULL OF MORE HOLES THAN A BLOCK OF SWISS CHEESE IN THE MIDDLE OF AN ORGY IN A DRILLBIT FACTORY

SO STOP BEING A

𝐂𝐎𝐖𝐀𝐑𝐃

AND GET THE SHOTOTOTOTOGUN TODAY

---

Directly inspired by a ridiculously-amazing post by Youtuber LICHTENSTEIN.

Environment - Mouth of the Goddess

A very old environment that I had started creating a long time ago and a fellow art buddy kept reminding me that I needed to finish.

So here it is!

Be warned, this environment is rather heavy resource-wise due to all the foliage, but all foliage has its own rigging to quickly hide different sections to help with resource management a bit better.

Comes with two Subsets that include a Day and Night version, as well as Render Settings for Day and Night.

I recommend that you apply the Render Settings after loading the Environments just to be on the safe side!

The Night subset also includes a customizable moon that provides actual illumination!

Also be sure to check the surfaces of the statue itself if you want an extra "appendage" on your statue.

Environment - Pleasure Pass

Long ago, two rival tribes fought numerous battles between one another. Tired of the needless bloodshed, a special pass was built between the mountains where every year their most virile warriors would meet and...compete.

"Pleasure Pass" is a large Daz Studio Environment that seems to only have one thing on its mind.

Included are three full scene subsets for exterior day or night and a cavern, as well as render settings for each version.

The "Open - Night" version also features a positionable moon that provides illumination, as well as a star dome that can be rotated or have your own textures applied to it.

All gates and doors are rigged for motion, and almost all elements of the scene can be hidden entirely to customize the appearance of your Pleasure Pass.

Also included are two isolated props - a torch statue and a rather interesting pillar.

Lastly, this set also includes my free "Morphing Flame for Iray" to ensure you have a customizable flame that provides illumination.

Now would you look at the time?

The anniversary fast approaches.

NOTES:

If you already own my "Morphing Flame for Iray," you will receive overwrite notices upon installation. Just accept the overwrites!

Each full scene is a scene subset that INCLUDES Render Settings, but Render Settings have been provided in a separate folder just in case.

This environment utilizes billboards for the background foliage in the "Open" environments to help ease strain on some systems.

Prop - Halloween Candy Bucket

Just in time for spooky month!

Needed one of these lil guys for a Halloween render and didn't feel like spending $40 for the one I found online, so I made one myself!

Simple-enough prop with a rigged handle!

Go getcha some goodies!

Prop - Medieval Service Window

Had a brain fever idea for some popular characters and made an asset to fulfill that need.

Unfortunately one character in question was quite large, but I thought this was still too fun of an asset to just keep to myself.

As such, re-scaling this wall will be required in order for it to be used properly in most occasions (the pose images up there use 95% scaling on the wall).

The wall has rigging on the pillars so they can be hidden separately if joining several walls together, and I'm also including three poses for G8F for this funky-looking medieval pizza oven.

The poses should also be able to work with G8M, but as usual expect some tweaking for best results!

Props - Toilet Brush and Basin

Another two simple props I modeled for a commission that I thought I'd share with ya'll!

Two separate props, a toilet brush and the basin.

The "Toilet Brush" preset is a Scene Subset that loads both the brush AND the basin together.

Lots of material zones come with this one so you can customize individual elements of both props.

Prop - Simple Post Note

A random prop I created for a commission I'm working on that I figured some folks might put to good use!

Just a simple post note that has a few morphs for curling the edges as well as that iconic "big curl" of the bottom of the note.

The lines themselves are simply a Diffuse Overlay, and you can customize the line color (or remove them entirely) by adjusting the Diffuse Overlay Color/Strength.

Also loads in with a geoshell that allows you to write your own messages on the note. Simply create a black and white image (white font, black background) and put it in the "Writing Geoshell" Cutout Opacity channel.

Poses - Foxy Fondlers 03 - Bored Bonin

It's a Saturday night, they invite you over to Netflix and chill, but what if what's on the screen is better than what's going inside?

Show your disinterest in style with "Foxy Fondlers 03 - Bored Bonin," a pose pack for Genesis 8 Female/Genesis 8.1 Female.

With 15 different unique couples poses that include three variations (gaming, watching TV, or talking on the phone), you're almost certain to find the perfect pose while your characters compete for a high score in more ways than one.

Aside from 110 TOTAL poses (between variations and applicable pose mirrors), this pack ALSO includes four props that compliment this pose pack - a TV remote, a gaming controller, and a 90s-tastic cordless phone and charging base.

Also included are hand grip poses to use with other poses you own as well as wearable presets to quickly and easily put the included props in your G8F's hot little hands.

So whatcha say? Go for another round?

NOTE: These poses were made and tested using G8F and should work just fine on G8.1F. They should also be compatible with G8M/G8.1M but they will require tweaking for best results!

Bundle - D2R Andariel for G8F

Hell is overflowing, and now its demonic hordes are spilling over the land of Sanctuary, corrupting and destroying everything in their wake.

Every soldier needs a commander, and just because you're a Lesser Evil doesn't mean you're any less-than.

Crawling from the gates of Hell is Andariel, The Maiden of Anguish...and now she's desperate to spread her influence into your runtime to cause a little hell of her own.

Included in this pack is EVERYTHING you need to turn your G8F into this iconic hellion, including:

Morphs - Ears, Eyes, Teeth, Head, Body, Legs, Hands, and Futalicious v3.2

Hair - Rigged for basic motion

Brows

Mantle

Chestplate - Includes DForce-friendly chains

Loin - Includes rigged AND DForce-friendly loinclothes

Appendages - Rigged for motion

Leg Spikes

Full Body Textures - Includes textures for Futalicious (match Futalicious UVs 2 template and CAN be used on Dicktator)

Also includes easy to use presets to quickly apply materials, morphs, and the full outfit.

So what the hell are you waiting for? Deliver us some evil.

NOTES:

This product was made for and tested using G8F, but it should work just fine for G8.1F.

Included in the product is an extensive readme that is nigh-on REQUIRED reading to make sure you get the most out of this product and addresses issues that may arise while using it.

Morphs do NOT affect character scale, so users are reminded that they will need to scale their figure manually for proper height differences with puny human heroes.

Materials - Mapped Glisten for G8F/Futalicious

Wanted to try and give an update to my old Top Coat Sweat Shader, so I decided to whip out Substance and make something a bit more "dedicated" for G8F.

These materials only change your figure's Metallicity, Metallic Flake, and Top Coat channels so most of your other skin settings should remain unchanged upon applying the preset(s).

Also included is a shader for Futalicious - just be sure you have the Futalicious SHELL and the Futalicious surfaces selected in the Surfaces tab before applying the preset!

Bundle - Lady Death for G8F

DOWNLOAD THIS BUNDLE BY CLICKING HERE

===

This one's a doozy of a drop, and it's too big for Patreon!

An entire getup that allows you to turn your G8F into Lady Death herself, including skin textures, hair, clothing, and weapon props!

This pack includes:

Head, body, ears, and teeth morphs*

Character textures and presets*

Hair

Sword*

Scythe*

Cloak*

Bra

Panty

Gloves (Left and Right)

Boots (Left and Right)

Pose/Grip presets*

---

Cloak - The cloak is both rigged and has dForce ready to go on it! Just be sure to adjust your dForce simulation settings for best results.

Sword and Scythe - Zero props as well as in-hand versions are provided for each hand on both props.

Poses/Grips - The poses/grips included are hierarchical pose presets. This means that when applying them to G8F, these poses will also apply to items in your figure's hand(s) if they match the information saved in the pose preset. Be sure you're using the correct preset based on what weapons you're using.

Character presets - The main materials preset is a hierarchical material preset and applies like most other material presets. Also included is a makeup geoshell as well as a geoshell fix preset that you can apply to existing geoshell(s) you may already have in the scene, such as those used by Golden Palace, Breastacular, etc.

Prop - Morphing Demon Collar

Was taking a break from working on some patron comics and played some Diablo IV. A loading screen popped up featuring a demon lady sporting the height of infernal fashion accessories, so I decided to model something inspired by that.

A simple prop that has a bunch of adjustment morphs, rigged chain links, and three different material presets for the Rune Glow shell - be sure you apply these material presets to the GEOSHELL, NOT THE COLLAR.

Just a prop! You'll need to manually position the collar on your figures!

Clothing - Materia Collar for G8F

A fellow artist on my Discord server asked if I still had the materia collar Scarlet and Tifa were wearing in my comic "Punch Drunk 2."

The collar they were referring to was a slapdash job of just mashing random primitive shapes onto an existing collar, so I took the opportunity to overhaul the collar and make something more "finished."

This is a simple-enough asset! The collar itself is a fitted item and can easily be recolored, and the stitching can be recolored via the Diffuse Overlay channel.

The materia socket and ring tab are parented to a Rigid Follow Node so they don't twist and distort from neck motion, and the tab and D-ring are rigged for basic motion.

Almost every aspect of this collar can be recolored easily via the Surfaces tab and respective material zones!

Bundle - Super Booty Outfit for G8F

Someone shared a silly getup in my Discord server, and it was ridiculous enough that I wanted to make it an outfit for G8F.

Comes with lots of stuff like:

Earrings (Left and Right)

Top

Panty

Shorts

Watch (Left and Right)

Boots

Geoshell Stockings

Purse (complete with lots of rigging for increased functionality)

The Geoshell Stockings are particularly robust and come with several material presets to affect things such as color, opacity, and - most importantly - displacement.

I've been playing with some concepts for skin bulging/indentation by way of using displacement maps, and these stockings have the option to utilize displacement to have skin indentation and bulging effects around the hems and the torn holes.

Note however that the G8F displacement preset will overwrite any current displacement settings your G8F is using, and all displacement presets must be applied manually. Ensure you have the CORRECT object selected before applying any of the presets.

For best results with displacement, ensure both your G8F and the stockings geoshell are using the same corresponding Displacement presets or else you will notice mesh clipping.

Also included are presets to apply the stocking effect to an existing geoshell, such as those used with geografts like Futalicious, Breastacular, and other similar geografts that utilize a geoshell for skin blending.

Prop - Pompous Bottled Water

Someone in another Discord server saw that Main Event Ring and wanted to make a posh fighter to put in it. Then jokes were made about her drinking only the finest bottled water, so I got to work and modeled this pompous bottled water that's based on a real brand that can retail for $175.00 a bottle...which is absolutely insane.

Simple prop but comes with rigging on the stopper and foil for movement/hiding and lots of surfaces!

Prop - Main Event Ring

Got inspired to make a special boxing ring from something I found earlier in the day and cobbled this together!

The bottom three ropes are rigged to allow for motion or to be hidden, and most of the individual components of the ring can also be hidden via rigging/surfaces.

Prop - Bopping Shades

Was working on a little conversion for my own use and needed some sunglasses for the character in question, so I went ahead and modeled these.

Super simple prop that comes with a bunch of rigging to help with fit!

Bundle - Assassin for G8F

A simple conversion of the D2R Assassin, for G8F!

Includes hair, pauldrons, tunic, belt, gauntlets, trousers, and boots as well as a face morph and face textures that match Totocandy's "Waifuno" skin textures (available on Renderhub).

The tunic also features rigging on the loincloths as well as dForce for simple cloth simulation.

Hair - Wowbrows for G8F

Made these a LONG time ago but never got around to releasing them.

Some inspired fantasy eyebrows for all your elves that include morphs and rigging to customize various aspects.

Also comes with several color material presets!

Prop - Marine String Lights

Needed a string light asset for a commission I was working on and didn't have any. So I made some, and now I'm passing them onto you guys!

A simple 12-light string of nautical-styled lantern lights. The string itself is rigged and also includes morphs to adjust the droop and length of the strand. The strand also has two "anchor points" on it to make the snapping of additional strings/instances much simpler.

Clothing - Medieval Carrying Harness G8F

Here's a random fun one for ya'll!

A simple medieval-inspired carrying harness for your G8F's. The handle strap itself is rigid, which means you WILL need to expect to have to do some manual adjusting to get the best results.

The handle itself also includes rigging to modify the strap's angle and tension.

Clothing - Fetish Corset 01 for G8F

An older asset that I originally made for G2F but never released. It's been updated for G8F and is yours to use for free!

No material presets for this, but it's simple enough to change the colors to your liking. Materials have also been separated into their own selection sets to make selecting multiple surfaces a bit easier.

Clothing - Collar Bikini Sling for G8F

A simple asset that was quasi-requested in my Discord server. It's a collared sling bikini top that has tension bones added to help maintain tension between the collar and the breast pasties.

No material presets for this, but it's simple enough to change the colors to your liking!

Clothing - Studly Pasties for G8F

Another simple asset I meant to share earlier and totally forgot.

Just some studded pasties to cover the intimate areas of your G8F, based on a reference image shared by someone in my Discord server.

Comes with a few different material options!

Clothing - Executioner Outfit G8F

Needed to make a getup for a character in a mini-comic and decided an older asset of mine needed a fresh coat of paint and some extra bells and whistles.

A whole executioner outfit for G8F, which includes the hood (with three materials options and dForce-ready), bracers (separated left and right), leg cuff (separated left and right), and a pair of panties that offers a convenient port to facilitate more in-depth sessions!

Poses - Sexy Slammers 15 - Wrung Out

Got a character with a sack full of seed to sow but refuse to give up those goods?

Get a handful of "Sexy Slammers 15 - Wrung Out," a pose pack for Genesis 8 Female and Genesis 8.1 Female that's bloated with 50 unique poses (and 50 pose mirrors) that are sure to milk out every last drop of that sauce.

With more than a fistful of handjobs to spare, "Wrung Out" can stand on its own as it brings your characters to their knees or fit in perfectly with the rest of my lineup of "Sexy Slammers" poses for Genesis 8 Female and Genesis 8.1 Female for longer sessions.

So what're you standing around for? Your characters are carrying a heavy burden, and you need to make them share the load.

NOTE: These are JUST poses for G8F/G8.1F, and users will need to pose the genitals themselves.

Though these poses were made for and tested using Genesis 8 Female and Genesis 8.1 Female, they can still work perfectly fine with Genesis 8 Male and Genesis 8.1 Male with some simple tweaking!