Neptune 3 Plus & Max Prusa Slicer Profiles
Added 2023-02-22 21:31:15 +0000 UTCHeya folks, here is a direct link to the Neptune 3 Plus & Neptune 3 Max prusa slicer profiles I've setup and I'm using for a .6 Nozzle.
I'm in the process of still refining a .8 and 1mm nozzle setup for the Max! Should hopefully have that here later this week!
https://drive.google.com/drive/u/1/folders/1caM3uashUirQpoKwERuDTcpxj1qc8LQx
Also sharing how you can setup something similar in a new vidya up on the youtube but will keep refining these here.
Also... I think I'm finally moving on from Simplify3D after all of these years. My prints are now just as fast off prusa slicer with the new tree supports & its becoming easier to work with.
Hope everyone is doing well. Will be posting a studio update later this weekend as well as I'm trying to setup some new recording spaces
Comments
Hello i tried to download the profile for Elegoo Neptune 3 plus 0,6 mm nozzle ... but when i tried to print with it the supports are like crazy hard to remove ... is there some fix for it ?
Arcade Shiro
2024-09-11 13:49:40 +0000 UTCWhat would you say are the important settings to change for 0.6mm nozzle and PETG? I see that a lot of the settings differ from when I tried to import the Elegoo Neptune 3 Plus profile (0.4mm nozzle) that PrusaSlicer already offers along with "Generic PETG".
Vincent Chov
2024-04-16 13:40:51 +0000 UTCI see these haven't been updated in a long time, I just joined so I could download these and I noticed the 3 plus profile is .6 as well and not .4 diameter
Roll4Stealth
2024-04-07 05:28:50 +0000 UTCJust upgraded my N3 max nozzle to .6mm and using the profile but seem to be having a lot of oozing issues. Alsoit looks like there's lots of holes or the print hasn't finished layering properly. Can provide photos. Any suggestions?
Gav Bartlett
2024-01-20 06:19:20 +0000 UTC0.6 profile for the N3 Max works a treat, finally let me print with my wood filament Wondering if the other nozzle sizes are going to be added to the list at some point?
Kyle Jmes
2023-12-23 17:28:09 +0000 UTCThanks dude ! gonna try that ;) have the max also !
Stormz
2023-10-28 19:10:00 +0000 UTCThank you, Uncle Jessy, for all your hard work!
Jonathan Renfro
2023-09-29 20:26:47 +0000 UTCImport Config: import a single profile.
Jonathan Renfro
2023-09-29 20:25:06 +0000 UTCNavigate to >File >Import. There are three possible options for importing custom profiles. in the slicer
Jonathan Renfro
2023-09-29 20:24:11 +0000 UTCi figured it out
Jonathan Renfro
2023-09-29 20:23:02 +0000 UTCHi Uncle Jessy! I’m defined using them!! Getting my max tomorrow. I loaded the model and sliced the Red Rood you printed in your demo on 100% (yes my head is big) you mentioned you got 35 hrs of print . My model with organic supports take at least 47 hrs… any suggestions??
Danilo Barbosa
2023-09-19 00:36:58 +0000 UTCDefinitely joined looking for a 1mm profile but all good. Thanks for the work ! Currently have a pretty basic 1mm profile but it’s not printing anything complex
Justin Gholson
2023-08-29 01:36:37 +0000 UTCDoesn’t look like there was any movement on this
Justin Gholson
2023-08-29 01:35:38 +0000 UTCdoes this work for cura?
Zachary Johnson
2023-08-22 22:36:55 +0000 UTCwhat about cura
Joey bourg
2023-08-07 04:49:22 +0000 UTCAny luck getting the rest of the nozzle profiles done for the Neptune Max
Bob
2023-08-03 01:31:09 +0000 UTCany chance we can get the 0.8 N3MAX profiles?
Jordan Gardiner
2023-07-17 23:52:08 +0000 UTCDo you have a source for Neptune 2 profiles?
Riley Bittle
2023-07-04 01:45:33 +0000 UTCI go to file -> file import -> import config and get the following error "ConfigBase::set_deserialize() failed" This is when trying to import the "Elegoo N3Max .6 Nozzle UJ" file. Has anyone been able to import this successfully?
Scott Spalding
2023-06-29 21:45:00 +0000 UTCIm not sure why I can't seem to figure this out. Can I get some help please?!
Sean
2023-06-28 21:13:35 +0000 UTCnewbie 3D printer user this might be a crazy question but when i imported Elegoo N3Max .6 Nozzle UJ.ini into Prusaslicer, all of the speed settings and Extrusion width settings are set to zero
Chuck
2023-05-23 03:06:01 +0000 UTCDo you plan to upload profiles for 0,8 Nozzle please? I think you mentioned it in video. Thank you
Viktor Brejcha
2023-05-19 10:13:26 +0000 UTCAm I missing the N3Pro files? Does it use the same as the Neptune 3?
Tanknstein
2023-05-09 23:26:12 +0000 UTCAwesomeness and thanks! I just got the Max and am putting on the .6 on it.
Lando
2023-05-08 23:25:44 +0000 UTCYes, I'd love a profile for the Neptune 3 Max with a 0.4 nozzle as well. Also, is there a profile for the Neptune X anywhere?
Florida Bill
2023-05-02 02:55:17 +0000 UTCIt's possible N3 Max prusa slicer profile for a 0.4 nozzle? I need It. Thanks
PinkYeliel
2023-04-20 21:28:49 +0000 UTCNo I haven't :( My prints are okay quality but I've started looking for different settings to see if anything helps.
Kyle
2023-03-30 16:58:11 +0000 UTCHave you solved the stringing problem yet? My elegoo neptune 3 plus has a lot of stringing with these imported settings. I am using a .6mm nozzle
Musa Ali
2023-03-30 16:28:11 +0000 UTCStill no Pro profiles?
Brandon Henry
2023-03-09 04:29:34 +0000 UTCI downloaded the prusa slicer a few weeks ago, but not had the opportunity to look through it, need to change that soon and check out your settings
Michael Tharme
2023-03-04 22:58:49 +0000 UTCWhat are the best nozzles to use with the Neptune 3 plus? I want to switch to .06
2 Krazy Ketos
2023-03-01 15:55:04 +0000 UTCI'm not seeing the profile for the Neptune 3 Pro either, nor profiles for the 0.4 nozzels.
TC
2023-02-28 21:55:39 +0000 UTCsame issue, tried alot of things so far
KeenEyePrints
2023-02-28 09:16:04 +0000 UTCAre ther other Slicer/Printer profiles posted somewhere
Paul Sears
2023-02-26 16:55:43 +0000 UTCOk.......even if you are still using a .4 take a look at his profiles. I looked at the settings because I was having issues with a print lifting in certain areas and thought it was due to retraction. Noticed his retraction was even faster then mine and that he had wipe function turned off. Made similar changes and now it's not lifting at all.
DF
2023-02-26 06:33:56 +0000 UTCWas the files for the Neptune 3 pro ever uploaded ?
Austin Morrison
2023-02-26 01:31:15 +0000 UTCWas this ever uplaoded?
Austin Morrison
2023-02-25 23:44:46 +0000 UTCThanks! I should have mentioned that
Uncle Jessy
2023-02-25 23:44:20 +0000 UTCYou could pretty much do the exact same and just change the .6 to .4 I will be seeing how I can further fine tune the speed settings
Uncle Jessy
2023-02-25 23:44:09 +0000 UTChaha I've been told the max should be back in stock soon....ish haha
Uncle Jessy
2023-02-25 23:43:24 +0000 UTCSo I was wondering what are you adjusting on prusa when it comes to Stringing
James DiFrancesco
2023-02-25 23:16:29 +0000 UTCI honestly have not had a single quality print with these profiles + .6mm nozzle on the N3Max. I have just been doing benchmark prints so far. The default prusa slicer 2.6 N3Max profiles for the .4mm nozzle were doing great. It should be noted I am using PETG.
Epic
2023-02-25 01:24:22 +0000 UTCHas anyone who made the switch to the .6 nozel and used the profile found and issue with their layer lines being more pronounced? I have used a .6 nozel before with this same stl and the layer lines are alot more pronounced and there is a visible bump out on the entire model where the support interface is. This is on the N3 Plus.
Zachary Sverdrup
2023-02-24 17:21:51 +0000 UTCI think its in the Gcode where it tells you the speed settings. i was curious toand when i poked around it looked like that was where the speed settings were set.
Zachary Sverdrup
2023-02-24 17:17:08 +0000 UTCAny chance to push that profile for the Pro? I want to set mine up with a .6 to print wood filament.
Scott Borlick
2023-02-24 14:36:01 +0000 UTCI imported this to prusa and now all the speed settings are set to 0mm/s, what does that mean?
Epic
2023-02-24 04:51:05 +0000 UTCwhich one is the plus? Also, I just got my Neptune 3plus using your link. Still have a .4 nozzle, do you have a profile for that? Do you have a video on how to import a profile to Prusa slicer?
2 Krazy Ketos
2023-02-24 04:02:49 +0000 UTCFrom Amazon for $5.79 ($0.72 / Item) Aokin 8 Pcs 0.6mm MK8 Extruder Nozzles 3D Printer Nozzles for Creality Ender 3/3 Pro/3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot, Anet A8 3D Printer Amazon's Choice for "6mm nozzle 3d printer"
Jay Goldthwaite
2023-02-24 02:15:01 +0000 UTCwhich nozzles did you order?
Alan Szopinski
2023-02-24 01:58:25 +0000 UTCThats what i am looking for as well
Alan Szopinski
2023-02-24 01:53:55 +0000 UTCI switched to a .6 nozzle on the Max using these imported settings into Prusa, but now I've got some stringing on a benchy test :( any suggestions?
Kyle
2023-02-23 20:07:34 +0000 UTCfile-import-import config
Goran Kozul
2023-02-23 18:47:40 +0000 UTCI set up the Neptune 3 Plus on Monday and installed the prusaslicer yesterday, I ordered some .6mm nozzles that will be in on Sunday, but I could use the settings for the .4mm. Also how do I import the .ini file into the slicer?
Jay Goldthwaite
2023-02-23 03:25:43 +0000 UTCHaven't made the switch to a .6 nozzle yet is there a guide on what to change in the profile for a .4 setup?
Nick Passamonti
2023-02-22 22:31:44 +0000 UTCThis is great now I just need to printer to come back in stock.
Roberto Montano
2023-02-22 21:51:05 +0000 UTCThanks a lot Uncle Jessy
Ivan
2023-02-22 21:50:29 +0000 UTC🤣😂 cold blooded
Uncle Jessy
2023-02-22 21:43:08 +0000 UTCOh let me add that one in there tonight!
Uncle Jessy
2023-02-22 21:42:51 +0000 UTCHow we gonna use the Max profile if they never sell the printer again? Lol
Matj1024
2023-02-22 21:41:39 +0000 UTCdo you have a profile for the Neptune 3 Pro?
John Mayo
2023-02-22 21:35:25 +0000 UTCFantastic!
Damien Underdue
2023-02-22 21:33:45 +0000 UTC
