CrystalFrostViewer

Another progress update on rigged meshes

Ok, we've got meshs almost figured out. As you can see here the mesh's vertices are now properly enveloping the mesh, so the placement is correct... There are some issues regarding which joint is w...

7th of February, 2024 rigged mesh progress report

I'm continuing to try to figure out what's going wrong with the rigged meshes.

It seems the math we have for how the skeleton should be arranged is not correct.

Now we need to figure ou...

More progress update on rigged mesh

So having played around with what we've got so far, I've come to the conclusion that the problem with the rigging right now is that the vertices are likely offset from where they ought to be, resul...

Mesh rigging progress

Here's the current state of rigged mesh progress. This was tested on Second Life, but the data is more or less the same with OpenSim, and we are also doing lots of testing on OpenSim as well.
2024-02-02 20:41:15 +0000 UTC View Post

Some visual progress on rigged meshes

Some good folks at the Open Sim AvatarLife grid have been working on rigged meshes. A lot of the hold up is just reverse engineering which I've been helping them with.

It's not muc...

Progress Update

The project has some developers who are going full bore on porting CF to mobile and they're also working on solving puzzles like cracking rigged and fitted meshes. Once they are done the code will ...

Fixed bug on varregions

So there was a bug when you logged into a varregion where nothing would happen. Literally nothing. No terrain, no objects, nothing. This was being caused by an unhandled exception. The problem has ...

Source for build 5.5 released to Snowcrashed

Snowcrashed users should now have access to the current state of the code as of the time of this writing. There's a lot of under the hood changes for efficiency and code management. Also this sourc...

Patreon Release 5

PLEASE NOTE: This release is primarily about testing stability updates when logging in to OpenSim grids. Some things have broken since the last update. The reason is because the systems involved ar...

October update

A breakthrough has been made in getting rigged mesh to work. Sliders for fitted and bento won't be supported right away however.

The breakthrough is that I can now access the weight data for ...

The Unity "runtime fee" will not affect the project

First off, let me just say that there has been an absolute shitstorm... nay a shithurricane of misinformation regarding what Unity has said. People watch videos, they look at screenshots, they didn...

Successful test of a VarRegion.

Wolf Mountain in the Wolf Territories Grid. Some quirks...

1: Framerate is really low for a while as it does the terrain patches. Some optimization will be needed. I've already done some opti...

Public progress update for August

I've finally got some progress to report.

First of all, I've got adjacent sims and their prims loading. First screenshot shows that, but you can see gaps between the terrains of the 3 sims. S...

Quick status update, and why progress is slow

Currently the patreon is just over $300/mo. My rent is about $1200/mo and utilities are about $300/mo. Food is about $200/mo. Not counting taxes which are 30%. So in order for me to work on this fu...

Avatar shape sliders are working!

It was a pain in the butt to make it handle multiple sliders simultaneously, but I got it working! At this point, all that's left is to implement the sliders that modify bone scales like arm length...

End of June 2023 Update

We've got the protocol for handling VarRegions on Open Sim submitted to LibreMetaverse and will be able to begin implementing it into Crystal Frost once it goes through. In the mean time I've been ...

Linden Base Avatar is now rigging

The base avatar is now able to be loaded and weighted at runtime, which means it's ready for animating. While the Bento Skeleton is in fact loading, only the pre-bento skeleton is currently support...

Proper Rigged Avatars Support Soon!

Here we have the standard Linden Lab base avatar that is what you see when you take off all your meshes and alpha channels on Second Life. Crystal Frost can now load it direct from the stock files ...

Patron Build 4 and Source release

New build released for Goggled In and up. Only new feature in it is that glow should be working. Sky, Water, and rez effects are currently disabled. It's released primarily to see if anybody can fi...

"Weekly" update about what's going on

I apologize for the info dump, I just wanted to let everyone know why there hasn't been an update recently, and be very transparent on what's going on.

So, just to keep you guys informed abou...

Patreon Build 3

A few things going on in this update. First of all particles should be mostly supported. Particle targets (such as used by leashes) aren't implemented yet, nor are particle ribbons as well as a cou...

Web link for patreon preview build 2

As in the last post, this build is primarily about a massive performance enhancement but also fixes a catastrophic bug regarding an as yet unsupported texture type that is so rare that I'm surprise...

Patreon Release 2

This update is kind of minor. Just a major performance increase as well as fixing a bug reported by a patron. Details and file in the discord for now. I'll put the file on the web and make a post f...

First Patreon Preview Release

This is an alpha version release for Patreon users only please do not distribute to the general public, and please make bug reports in the patreon bug reports channel on the discord.

An alter...

One final demo of water prims.

Nothing has really changed, I was just trying to fix sculpted prim rendering and orphan prim handling, got that done, then I rezzed a sculpted boat and put it on a pivot box that slowly rotates to ...

Colorable Water Prims

Water prims now obey the color setting of face 0 of the prim with the water prim tag.

So best way to make a water prim is this. First make a box in Second Life. Second, give it what ever tex...

SPLOOSH!

Not only does Crystal Frost have water prims, which LL refuses to implement, but they knock it out of the park and smash a window of a car in the parking lot outside the stadium. The water is reali...

Progress report and de-rez effect preview

Today I got a lot done. Figured out a lot of problems that have been irking me for ages. Such as being able to retrieve object name and description, as well as avatar name. Once those were done, I ...

Object Updates

Objects and child objects are now updating their position, rotation, and scale. I still have to implement prim torture and face changes. Prim torture changes shouldn't be too difficult, but changin...

First successful test of exploration.

The avatar, which is the grey box, can be moved around now. The other tall, grey boxes are likewise other avatars.

Avatar rendering is a ways away because it requires alot more than I curren...