October Release - Halloween miniatures!
Added 2020-10-15 16:58:52 +0000 UTCHey there guys! Here is October release! It also cames with a halloween themed base for you to use anyway you want. I've tested all the models except from the lich queen, the uv lights from my Photon died on me and they are out of stock atm. My guess is that it should print correctly with the presupported model. In any case I'll update the files when I got my Photon is back on running.
Here's the link guys! Enjoy! :)
https://ln2.sync.com/dl/ecc5fc530/r7xnaqda-3jhbpac2-59rinhbk-ey2b3ef6
Jacob - Roleplaying Miniatures
Comments
Trying to download the link and it's asking for a password. Where can I find the password?
Jakub Bryjan
2020-11-25 20:30:00 +0000 UTCI've just messeged you the password here on Patreon
2020-11-03 01:32:49 +0000 UTCI joined last month. Trying to download the link and it's asking for a password. Where can I find the password?
2020-11-03 00:49:29 +0000 UTCDown printers are the worst :( I appreciate your reply as always. I know how hard it can be to support models. I spent about 4 hours supporting two 6-part minis yesterday, and while they printed fine, i had 3 pieces fuse to the supports because they were too close. Its always a learning experience :)
Matt Horbund - Potent3D
2020-10-19 23:16:57 +0000 UTCThank you for the feedback man! I appreciate, I'll update the files asap! I've just order the parts I'm missing for my printer so I'll be testing them very soon myself! Luckly I got the beholder printed before my UV lights went caput, I'm painting it and yes, It needs some support optimization on the back to make it smoother and easier to paint. I'll also be doing that! Thank you!
2020-10-19 11:47:46 +0000 UTCThanks for the quick reply :) I just printed the pumpkin beholder - hollowed. I noticed there were no drain holes after I printed them, so i'll have to drill them out to ensure no resin is inside. There was also some aggressive support on the pumpkin part that will need some cleanup, but that's not terrible. On the scarecrow, if you're looking at him (or her..) in the face, on the left side around the waist, there is a pillar of support that is so close to the body that on my Mars it fused to the model I actually have 2 machines, and printed the same slice on both of them, and it fused on both. I dont paint, but im sure if i did, i would find a way to clean those up in post :) Fun stuff, the pre-supported definitely saves me time.
Matt Horbund - Potent3D
2020-10-18 12:08:02 +0000 UTCAbsolutly I will do that in the future if that helps! I normally print them at 0.05
2020-10-17 21:44:38 +0000 UTCOh, also, when you support/test - what layer height do you use? I normally print at 0.03
Matt Horbund - Potent3D
2020-10-17 20:08:16 +0000 UTCLove the beholder, and the scarecrow. Going to print them today hopefully. I wish i painted, but just dont know how and havent taken the time to learn. Any chance, going forward, you can include the pics/renders of the models in the folders
Matt Horbund - Potent3D
2020-10-17 20:07:43 +0000 UTC
