Masterwork Tools

Towne Square Doors

The Town set should now be fully usable.  This month we have Towne Square Doors.  Like the prior towne releases, we've got the same sets of variations of stone and stucco.  This also...

More of the Cut-Stone update is live on Thingiverse

Cut-Stone corners are now configurable. With this, you can make a corner tile that has a single window, a window on both sides, a door, a door on both sides, or a door on one and a window on the ot...

Cut-Stone wall on tile sets updated

It's been a huge set of updates, but Cut-Stone wall on tile sets are now all converted to all the latest standards, over 550 stl files.  This was the top voted set for march, and it's been wor...

Towne Corners

Next Step in a basic towne set: Corners.  We've done these corners differently than we normally do.  They are made up of two walls, and a pillar.  We did this because when trying to ...

Towne Walls

Ok, the walls are up!  I've rethought a lot about these, and part of where I went was in the combination of stucco and stone.  For the 2x2 walls, there are 8 variations (so far), includin...

OpenLock Towne Wood Floors

There I go, pulling the trigger too fast.  Whoops.  Here's the OpenLOCK Primary Floors, including the single piece prints.

Grab them on 2019-02-25 21:28:39 +0000 UTC View Post

Towne Wooden Floors

First release is here for the new Towne Series.  Based on the feedback, I did a few more changes to the floors (they are thinner now), and printed and painted a bunch of them, and I think they...

OpenForge Places of Power: Carved Rock Pillar

Today Evan is introducing a new series for OpenForge called "Places of Power"! These will be large multi-purpose set pieces, designed and themed to various environments to plug-n-play in any RPG ca...

Dungeon Stone Pillars (Internal Corners)

This was one of the top vote getters in the feb vote.  I've been working on the pieces that will be needed for the tudor reboot, and wanted to get something else out, so since this had the sec...

Print comparison

Should be last post on this today.  Just finished printing one, and I happened to have a primed but unpainted copy of the old tudor floors for reasons.  This photo does a good job of illu...

Test print of wood floor

Here's an stl of the beta wood texture.  I should have been more specific about what I was optimizing for, because I do still like the old wood texture as a model.  The problem is that it...

Tudor rebuild progress

So I've started on the tudor rebuild process.  First order of business was to create a new process for making wood planks.  This is my first cut.  Left is a square from the existing ...

Jack the Giant Slayer

One of the things I love doing is giving more exposure to other fantastic modelers in the Thingiverse community.  If you have not seen the awesome miniatures published by 2019-02-04 17:18:11 +0000 UTC View Post

Dungeon Stone Stairs

This is the first tile created using our new patron voting process.  This month they voted for Dungeon Stone as a set, and Stairs as the tile.  I've done stairs before, but I felt the pri...

Cavern Entrance

Evan has something a little different for us today! This is a set-piece for a cavern entrance, featuring the exterior with some large dilapidated pillars, a rune drawn placard and cave etching on t...

OpenForge Encounters: Spirit Shrine

It's been a long time, and I really needed to finally close out the elemental shrines. Since I was using the wiccan model of 4 earthly elements spirit, this, the last shrine is the spirit shrine. 2019-01-25 19:34:59 +0000 UTC View Post

Magnet deal

Many of us need lots of 5mm sphere magnets.  I know I burn through enough that some day there will be a neodymium mine in china that has a plaque dedicated in my honor (probably not).  I ...

January voting closed and some questions

Voting for January is over.  I'll start the vote for Feb the week before the start of Feb so that I know the result before the month starts instead of half way through it.  It was a tight...

Dark Elf Sentry Tower

This is a Dark Elf Sentry Tower! The tower is modular and can be stacked to any height. It's a smaller tower (2x2" pieces) designed to hold a single mini on each floor or top. There are 3 floor var...

Alcoves

This set adds alcoves. I've needed these tiles many times in my own games, so this release is born of my own GMing frustration. They let you add flair to a hallway or other rooms that can still be ...

Volcanic Cavern Triangular Floors

As promised, here is the floor release.  This is all still very experimental, so please, try it, and give me your thoughts.

Grab the files on 2018-12-27 22:08:17 +0000 UTC View Post

Volcanic Caverns Go Angular

This is first and foremost an experiment.  For at least a year, I've been noodling on why I'm not a huge fan of the approach that has been taken generally towards caverns, and a big piece to m...

Niche release

I couldn't help it, the pun had to happen.  Lots of castles and dungeons features niches where you can find all manor of things.  Small shrines, scrolls, swords, clues for a puzzle, statues?...

Oriental Pagoda

Evan has created a beautiful new Openforge building.  This OpenForge release includes everything required to make an oriental pagoda for all your martial combat, sage wisdom, or quiet meditation ...

Forgot to mention

Many people also gave feedback that the pillars were too perfectly uniform in size and shape.  I figured out a way to change that as well.  It's not visible in all the pictures, but this one...

Volcanic Cavern Corners

After the release of the Volcanic Cavern floors and walls were released, I got a ton of useful feedback on them, and as most of you know, I polled you all to determine what direction the set should go...

Dungeon Stone Curved Doors

We're inching closer to completion of the base set of Dungeon Stone.  This release, we have arched doors for curved tiles.  We also tossed in some curved floors so that you can do holes like...

Curved Dungeon Stone Windows & More

Today we have curved Dungeon Stone windows.  We have the full gamut, from 2x2 all the way out to the huge 8x8 pieces.  On top of that, we've extended the entire curved line by adding in curv...

Volcanic Wall Poll

Post releasing the first two pieces of the volcanic cavern set, I got a lot of feedback from people who have actually seen basalt pillars in person, and the single largest piece of feedback is that th...

Volcanic Cavern Floors (Part 2)

As mentioned in the prior release, here are the Volcanic Cavern Floors.  Pictured is the more crystalline or ice paint scheme.

In case you want to see the inspiration for this, check out <...